I've attached an html file and a text file that keeps the formatting tabs.
Pete, I've copied my brief 'how-to' get HRD and DM780 working with PowerSDR and the Flex5000a. I haven't been able to have PowerSDR change modes from DM780 so I do this manually. Also, the 'tune' function in HRD doesn't work. I've made RTTY, MFSK, Olivia and CW contacts with the present setup. I hope this will help. Ted, NX6C HRD CWRTTY/Digital setup3/15/2008 _____________________________________________________ Flex The Setup->CAT->audio input and output is the same as MixW Setup->DSP->keyer->primary5000 secondaryCOM8 PTTDTR keylineRTS Setup->CAT->enable CAT portCOM6 baud57600 paritynone data8 stop1 enablePTTcontrol portCOM7 RTS(check) DTR(check) ID=TS2000 _____________________________________________________ DM780 options->mode CW-> (check) use PTT (check) enable serial (COM) port keying serial portCOM18 toggle pins(check) DTR (check)RTS options->PTT->COM port(check) enable PTT via serial (COM) port port COM17 on TX(check) set DTR (check) set RTS options-> Sound card-> INPUT(receive) deviceVirtual Cable 2 SOURCEline Automatic Gain Control(check) increase 10% OUTPUT (transmit) deviceVirtual cable 1 sourcewave options->waterfall1(check) show RF frequency Note: Manually switch the PowerSDR to CW or Digital modes. The above setup will not change the PowerSDR radio modes when DM780 changes modes. ___________________________________________________________ HRD basic setup for DM780 and PowerSDR with the Flex-Radio 5000a tools-> Soundcards -> Select Input (line-in, microphone)Virtual cable 2 Output (Volume, mute)Vitural Cable 1 tools -> Options -> skinning (uncheck) skinning [this decreases CPU usage] file -> Connect -> add CompanyKenwood RadioTS-B2000 COM PortCOM16 Speed57,600 flow control / Interface power (check) CTS(check) RTS Note: tools -> tuneup does not make the PowerSDR TUNE button work. ----- Original Message ---- From: Peter Spader <[EMAIL PROTECTED]> To: [email protected] Sent: Saturday, May 3, 2008 6:17:42 AM Subject: [Flexradio] Ham Radio Deluxe on 5000A I have set up SDR using MixW with no trouble. I like HRD, but I am having troubles setting it up. It works well on recieve, using either the PSK31 within HRD or the DM870 module, but does not connect on transmit. I suspect it is a problem in setting up the proper COM Ports in VCOM. Exactly what settings should i use. (I am using 6-16 in MixW, Incidentally, I have this problem when I use the SDR1000 or the Kenwood TS2000 emulations in HDR. I am using the new Build1832 HRD. Any suggestions would be appreciated. Pete (K2HGO) _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
