If the "lock" check box is checked, then you will hear a click when the TX ANT connector is changed to a different connector. If it is not locked, then there is no relay click when changing just the TX antenna connector.
Do you have the ATU installed? -Tim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Gardner Sent: Wednesday, July 30, 2008 9:25 PM To: FlexRadio@flex-radio.biz Subject: [SPAM] [Flexradio] 5000a Tim - I deleted the database and restarted radio, still have the same problem. I also ran the firmware upgrade for the series 34 rfio over again with no change. Should I be hearing a click from the relays when I change the TX antenna port? Dave _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/