I was sure I'd recalibrated after loading 12.1, but that was obviously not the case. Getting senile I guess.
Thanks, Eric. 73, Jim AF9A On Aug 5, 2008, at 9:22 PM, Eric Wachsmann wrote: > It sounds like neither a bug or a feature to me. Just a level > calibration > issue. Use that handy generator to calibrate the level and it will > set the > meter and the display level appropriately. > > > Eric Wachsmann > FlexRadio Systems > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jim Keeth > Sent: Tuesday, August 05, 2008 7:24 PM > To: flexradio@flex-radio.biz > Subject: [Flexradio] Feature or bug? > > On PowerSDR v1.10.4, when the receiver (SDR1000) was tuned to a CW > signal from a generator set at -70 dBm, the RX signal meter would > read -70 dBm and the Panadapter would show the peak of he signal > very close to -70. In versions 12.0 and 12.1, doing the same thing > gives an RX signal meter reading of -70 dBm but the Panadapter shows > a peak in the -40 dBm range. > > This is not what I would expect. Am I missing something? > > Thanks. > > Jim AF9A > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
