Stig I suspect my 5000A is the same way. I can't run the 5000 more than 30 to 50 watts drive output on SSB (depending on the band) without tripping the very fast acting overdrive protection on my Tokyo Hi Power HL-1.5KFX. With continuous carrier tests, I can drive my amp to full output without a problem.I'm just waiting for a flexwire ALC accessory.
Jim K5HY > From: [EMAIL PROTECTED] > To: flexradio@flex-radio.biz > Date: Sun, 17 Aug 2008 23:16:36 +0200 > Subject: [Flexradio] SDR-1000 high owerpower peaks in SSB > > Hello, > > I just bought a swr and power meter LP-100A. > (http://www.telepostinc.com/lp100.html ) > And suddenly I got aware of that my SDR-1000 with FA66, gives all to much > SSB power peaks than expected - and calibrated (100W), så what can this be? > It peaks over 153W some times. Even if I lower the drive, it still have > peaks much over 100W. > None of my other 100W rigs behave like this on the LP-100A. > I have run the calibration over several times with dummyload, same problem. > It seams like the calibration-tone don’t drive the audio high enough to give > an accurate max power? Or does someone have an explanation? > (I must really pull down drive under 50, to avoid my Ameritron 572B give > more than a KW out.:-) > > > 73 > LA4WAA - Stig > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
