Yep, it works when I changed the VAC cable top end to 192000. I have a
couple of skimmer newbie questions though:
1. Regardless of what bandwidth, skimmer only shows abt 23 kHz. Is
there a way to make it show more?
2. It seems Skimmer thinks that spots are about 1.2 kHz higher than my
radio (so if I click on a call its off tune.) Do I adjust the IF freq
setting in skimmer to zero beat it?

Neal
Neal Campbell
Abroham Neal Software
Programming Services for Windows, OS X and Linux
(540) 242 0911
---------------------------------------------------------------------
Try Spot for OS X, the intelligent DXCluster Client at
www.abrohamnealsoftware.com -  $15.99
-------------------------------------------------
For a great dog book, visit www.abrohamneal.com
-------------------------------------------------
See the FlexRadio Systems Flex-5000a in
action at www.flex-videos.com




On Mon, Nov 3, 2008 at 4:22 PM, Edward Russell <[EMAIL PROTECTED]> wrote:
> Hi Neal,
>
> I verified that 192khz/2048 is working with PowerSDR and Skimmer. Here are a
> few things to check:
>
> On the PowerSDR Setup VAC page select a VAC output cable, and set the mode
> to "Windows Direct Sound". (MME might work but has more latency.)
>
> On the VAC Control Panel make sure that the SR range for that cable goes up
> to 192khz.
>
> In Skimmer on the Audio tab select that cable for input and select WDM mode.
>
> On the Radio tab select SoftRock-IF, 192khz, CWpitch=600, AudioIF=9600
>
> Let me know how that works out.
>
> 73 Ed W2RF
>
>
>> -----Original Message-----
>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>> radio.biz] On Behalf Of Neal Campbell
>> Sent: Monday, November 03, 2008 3:33 PM
>> To: FlexRadio Reflector
>> Subject: [Flexradio] 192 Khz and Skimmer?
>>
>> Hi all
>>
>> Might have missed this but tried to run my 5000a at 192kHz/2048 with
>> the instructions published for using CW skimmer and kept getting
>> invalid device. If I turned off VAC it was normal. I have no idea if
>> it was using WDM or not but it didn't work. Anyone had similar?
>>
>> 73
>> Neal k3nc
>> Neal Campbell
>> Abroham Neal Software
>> Programming Services for Windows, OS X and Linux
>> (540) 242 0911
>> ---------------------------------------------------------------------
>> Try Spot for OS X, the intelligent DXCluster Client at
>> www.abrohamnealsoftware.com -  $15.99
>> -------------------------------------------------
>> For a great dog book, visit www.abrohamneal.com
>> -------------------------------------------------
>> See the FlexRadio Systems Flex-5000a in
>> action at www.flex-videos.com
>>
>> _______________________________________________
>> FlexRadio Systems Mailing List
>> [email protected]
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-
>> radio.com/
>
>
>

_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Reply via email to