On a different tack, I have an Elecraft KAT100 which I would like to interface to the 5K - is this possible using the D connector on the back of the Flex?
TIA Charlie GI4FUE -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ray Andrews Sent: 20 February 2009 12:37 To: 'Bill Photinos'; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] external tuner control Bill, The MFJ-998 is an automatic antenna tuner. If you set the FLEX-5000 internal tuner to BYP (Bypass), then clicking on TUN will cause the FLEX-5000 (or SDR-1000 for that matter) to transmit a carrier at the tune power level. With the MFJ-998 in automatic mode, it should tune automatically. Click TUN again to return to normal operation. 73, Ray, K9DUR -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bill Photinos Sent: Friday, February 20, 2009 7:16 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] external tuner control Is there any provision in the hardware or software in the Flex-5000 to support an external tuner such as the MFJ-998 and similar? Thanks, Bill - W4RVN _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.0.237 / Virus Database: 270.10.25/1958 - Release Date: 02/19/09 18:45:00 _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/