Hi All,
I found and fixed one thing on the list. The RTTY was gibberish until I
switched to RTTY reverse, then the decodes are fine. I still have not figured
out why I would have to set MMTTY to reverse when the signals are correct.
I hooked up the 756 Pro II to it's normal computer and worked a couple of
stations on 20m RTTY. It's working fine, good decodes and on frequency. I
switched the F3000 and Pro II to dummy loads and was transmitting RY at
minimum power on one radio at a time and checking for decodes on the opposite
computer. When I tried reverse RTTY on the F3000 everything started
decoding.
The Pro II is on 14.081.00MHz. The Flex is receiving it at 14.081.00 on the
Panadapter. The F3000 is transmitting on 14.081.00Mhz. Still have the
problem of the F3000 reading 14.078.690MHz on the VFO. I checked the sampling
rates and buffers and all are set the same.
#1 Why is it running RTTY reverse?
#2 Why is the VFO off by 2310Hz?
Marty
**************2009 3 Free CREDIT SCORES: See Your 3 Credit Scores from All
3 Bureaus FREE!
(http://pr.atwola.com/promoclk/100126575x1221797372x1201397989/aol?redir=https:%2F%2Fwww.freescore.com%2FOffers%2FStart%2FFreeCreditRepor
tAndScore.aspx%3FID%3D91831F371F138345B53A153F49D4D872%26siteid%3De927580bf7
)
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
