F3K -PWSDR v1.18.0 - Vista Home Premium SP1 - Asus 1.89 (Pro50N) Dual
core 2gb ram
Tim and All
Took your advice and uninstalled vCOM and installed com0com - all
configured ok with 3 virtual com ports and
able to see them in device manager
I have VAC installed and I am able to see audio in all 3 of my Digital
programs
In Mixw as well as seeing audio I can control the frequency of the F3k
from Mixw but It will not key the PTT
nor can I key the PTT from the other two programs
Any ideas?
Tim Ellison wrote:
I highly recommend dumping vCom and using Com0Com for a virtual com port pair.
http://kc.flex-radio.com/KnowledgebaseArticle50062.aspx
http://kc.flex-radio.com/KnowledgebaseArticle50078.aspx
-Tim
-----Original Message-----
From: Les Keppie [mailto:[email protected]]
Sent: Tuesday, May 26, 2009 7:16 PM
To: Tim Ellison
Subject: Re: [Flexradio] Flex 3000 LSB and DIGL
Hi Tim
Ok - All fine now after resetting the offsets - a lot to learn about this F3K
So far have VAC working and delivering audio to my 3 digital programs Not doing
so well with vCOM - keep getting getting - cannot open Com16 have to redo all
again today and see if I can get it to key theradio Many thanks Regards Les
Tim Ellison wrote:
In DIGI mode, there is a 1200 Hz (by default, but user configurable) offset to compensate for the AF offset from the carrier frequency required by digital mode sound card programs.
-Tim
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Les Keppie
Sent: Tuesday, May 26, 2009 1:50 AM
To: FlexRadio Reflector
Subject: [Flexradio] Flex 3000 LSB and DIGL
Flex3K - PSDR v1.18.0
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
