I think you had better define what you mean by Remote Control One can already remote control the band switching of the PW-1 using DDUTIL
So I suspect that you mean remote controlling the following: 1. Turn Power ON/OFF 2. Engage the Tuner Button (Cause the Tuner to tune the Antenna) 3. Engage the Amp Protect Button (Put the Amp into and out of the circuit) 4. Switch between Input Exciter1 to Input Exciter2 5. Switch between Antenna 1, 2, 3 or 4. __________________________________________________________ Howard S. White Ph.D. P. Eng., VE3GFW/K6 ex-AE6SM KY6LA Website: www.ky6la.com "No Good Deed Goes Unpunished" "Ham Antennas Save Lives - Katrina, 2003 & 2007 San Diego Fires, 911" -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ed Helms Sent: Sunday, June 21, 2009 2:03 PM To: flex radio Subject: [Flexradio] Flex 5000a to PW-1 Has anyone figured out or is any one working on a way to remote control the ICOM PW-1 amp. I would love to be able to contol it remotely. N4zvn>Ed _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/