Yes, that is what I run here. However, I use the Ameritron ARB-704 interface. No issues what so ever. Standard set up. Joe WC4R
www.rothweb.net www.WilliamsburgWX.com www.wc4r.com -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of icst...@comcast.net Sent: Tuesday, June 30, 2009 3:59 PM To: flexradio Subject: [Flexradio] Command AMP - Flex5000 Any one running a Command HF-2500 AMP connected to a Flex5000? When I push the PTT on the Flex, it activates the amp, but does NOT unkey the amp. when I release the PTT. The radio goes to the receive mode. Probably something to do with t he Darlington circuit in the Flex.The amp has a relay in the keying circuit, so I do not see the need to build another relay circuit to go between the Flex and amp. Any help would be appreciated. Owen KB5XE _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
