Have you been playing around with the SVN test versions? If so, you need to re-calibrate the RX image because there is experimental code in TEST that mucks with the RX image if you revert back to a released version.
As a precaution, I'd re-run the RX image calibration just to be safe. -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mark Lunday Sent: Wednesday, July 08, 2009 10:28 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Question about images of strong signals Noticing something interesting with my F3K and SDR 1.18.1 For strong signals (higher than -105 dBM), I am getting images of those signals about 20 KHz away. Currently on 6 meters, K4RX calling CQ on 50.101 at -100 dBm. I can hear/see him on 50.121 at -120 dBm. I am also seeing this with some SSB signals on 6 meters. Pre-amp is on. When turning Pre-amp off, it helps but the signal is still there. I just realized that this is happening, so I need to look around on the other bands. Anyone else seeing this? Mark Lunday WD4ELG <mailto:wd4...@arrl.net> wd4...@arrl.net <http://wd4elg.net> http://wd4elg.net _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com