The data for the decoded audio is in the Main Service Channel (MSC) which is
the far right "led" on the opening GUI. It must be on to hear any audio.
Under "sound card selection" in dream, "sound out" normally is your PC's
sound card (i.e. connected to your speakers). You only need VAC for audio
IN to dream (vac cable 2 for sound in).
Mel, k0pfx
----- Original Message -----
From: <vtnn...@comcast.net>
To: "Flex Radio" <flexradio@flex-radio.biz>
Sent: Thursday, August 06, 2009 6:34 PM
Subject: [Flexradio] DRM displays but no audio
I have DREAM receiving Vatican Radio on my 5000 at 9.755mhz in PSDR DRM
mode.
The DREAM display level is about -15db, the display on the left says
Vatican
Radio 14.48kb EEP AAC+ Mono. The box on the right side has various
changing information.
However I never get any audio. The same goes for TDP at 9.790.
In the settings box sound in is virtual cable 2 and sound out is virtual
cable 1.
Anyone have any thoughts as to why I am not getting any audio?
Thanks
Zack
N8FNR
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
Message delivered to m...@melwhitten.com
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to arch...@mail-archive.com
