I intend to use my F3K with my 6 meter quad. *At the F3K coax end* the
quad & feedline measures an SWR of ~1.5 with my miniVNA, and the |Z|
value is reasonable as well, not too far from 50 ohms, in accord with
the SWR, at 50.1 MHz.
When I try to use the ATU on the Flex, it goes through its routine, and
indicates an SWR of ~1.7 (tune power 10 watts at 50.1 MHz) but the green
overlay on the ATU button does not come on. Repeating the cycle does not
change things.
What is going on?
John Ragle -- W1ZI
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to arch...@mail-archive.com
