thank you Tim for this info E&T Paim
--- On Tue, 3/11/09, Tim Ellison <telli...@itsco.com> wrote: From: Tim Ellison <telli...@itsco.com> Subject: RE: [Flexradio] technical info To: "elan paim" <paimg0...@btinternet.com>, "flexradio@flex-radio.biz" <flexradio@flex-radio.biz> Date: Tuesday, 3 November, 2009, 11:10 PM The protection logic is working all the time. If you want to test it, put a high SWR load on the transmitter (>3:1) and try transmitting. -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of elan paim Sent: Tuesday, November 03, 2009 6:06 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] technical info hi Tim ok many thanks for this info ,however do you know how the protaction working in order to keep the stress low on the PA ? i do not see anything in the manue about it , just like to know i am sure many as well like to know . many thanks for any info E&T Paim --- On Tue, 3/11/09, Tim Ellison <telli...@itsco.com> wrote: From: Tim Ellison <telli...@itsco.com> Subject: RE: [Flexradio] technical info To: "elan paim" <paimg0...@btinternet.com>, "flexradio@flex-radio.biz" <flexradio@flex-radio.biz> Date: Tuesday, 3 November, 2009, 10:54 PM You get a BIG RED box in the middle of the Panadapter indicating that you have High SWR. The PA can take a high SWR for a little bit of time. It is the responsibility of the operator to shut down transmission when high SWR message is received. -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of elan paim Sent: Tuesday, November 03, 2009 5:34 PM To: flexradio@flex-radio.biz Subject: [Flexradio] tecnical info can any one cover this issue , on normal radio like 9000 etc when high swr presents. you have a red light so then you use your atu , how the protection working on the pa section on the flex when high swr present. ? intersting to learn , is the flex power going automatic to low or / i do not see this cover on the manual . E&T Paim _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
