Why not Post them as "Service Bulletins" with an explanation behind the
ECO...? I'd sure like to know of any production changes that can be applied
to my Flex 5K....
73...Jordan VE6ZT
----- Original Message -----
From: "Gerald Youngblood" <ger...@flex-radio.com>
To: "'Jerry Flanders'" <jefland...@comcast.net>; <flexradio@flex-radio.biz>
Sent: Tuesday, December 08, 2009 9:55 AM
Subject: Re: [Flexradio] ECOs for 5000A?
Jerry,
We don't normally document ECOs in the Knowledge Base unless there is some
specific reason to do so.
Gerald
Gerald Youngblood, K5SDR
President
FlexRadio Systems
13091 Pond Springs Rd. #250
Austin, TX 78729
Phone: 512-535-4713
www.flex-radio.com
"Tune in excitement!" (TM)
-----Original Message-----
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jerry Flanders
Sent: Tuesday, December 08, 2009 10:33 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] ECOs for 5000A?
Is this ECO documented in the Knowledge Base? I can't find any
reference to it there.
BTW, Tim, when I quick-searched in the KC for ECO, I got two pages of
hits, but the second page seems unrelated - i.e., not ECO hits.
Jerry W4UK
At 10:15 AM 12/8/2009, Gerald Youngblood wrote:
Mark,
Yes, you are correct. The Revision "C" ESD diodes on the B-0034 HRFIO is
the only FLEX-5000A ECO.
Gerald
Gerald Youngblood, K5SDR
President
FlexRadio Systems
13091 Pond Springs Rd. #250
Austin, TX 78729
Phone: 512-535-4713
www.flex-radio.com
"Tune in excitement!" (TM)
-----Original Message-----
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mark Ericksen
Sent: Tuesday, December 08, 2009 5:28 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] ECOs for 5000A?
Speaking to Flex the other day it was mentioned that there is a minor
modification to the HRFIO board (#34) that involves adding some diodes, I
believe (Revision C). I believe that the diodes protect the inputs to the
board.
--------------------------------------------------
From: "Ken Simmons" <k...@flex-radio.com>
Sent: Monday, December 07, 2009 6:11 PM
To: "Alan NV8A" <n...@charter.net>; "FlexRadio Reflector"
<FlexRadio@flex-radio.biz>
Subject: Re: [Flexradio] ECOs for 5000A?
> NO, just the power connector and fuse necessary for the V/U 60Watt
module.
>
> Ken Simmons, K5UHF
> FlexRadio Systems
> Senior Design Engineer
> 13091 Pond Springs Rd. #250
> Austin, TX 78729
> Phone: 512-692-9044
>
> "Tune in excitement!" T
>
> ----- Original Message -----
> From: "Alan NV8A" <n...@charter.net>
> To: "FlexRadio Reflector" <FlexRadio@flex-radio.biz>
> Sent: Sunday, December 06, 2009 4:24 PM
> Subject: [Flexradio] ECOs for 5000A?
>
>
>> Back in October Mark Ericksen asked about ECOs for the 5000A, but I
>> saw
>> no response.
>>
>> Are there significant mods that will be done when 5000A units are sent
>> back for installation of the high-power V/U module?
>>
>> 73
>>
>> Alan NV8A
>>
>>
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
Message delivered to ger...@flex-radio.com
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
Message delivered to outposte...@shaw.ca
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to arch...@mail-archive.com
