I'm looking for a few serious contesters to beta test the new SO2R feature in DDUtil.
Features as follows: * Control two (2) separate 1 of 10 antenna arrays one for each VFO/Amplifier using parallel ports. Depending on the decoder used the number of antennas can be as many as sixteen (16) per decoder. * Band switch up to two amplifiers via BCD data output from the parallel port(s). * Sets the proper PSDR drive setting for each amplifier by band. * Selects both receive (Rx 1/2) and transmit antenna ports on the radio for each VFO. * Selects PTT control lines based on VFO selection. * Select transmit VFO via PSDR console OR external switch connected to a designated serial port. * Rx2 is automatically started when SO2R is enabled. * DXLab and N1MM contest/logging programs are directly supported. If you would like to run two amps, multiple antennas on each amp all controlled by N1MM this is for you. Single amps can also be used but The SO2R feature requires a Flex-5000 with a 2nd receiver and one free LPT port for each amp. To sign up or get more information contact me directly at sna...@charter.net 73, Steve K5FR _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com