Russ,
The radio interface to the 998 tuner is only for basic tuner control
Start Tuning, Inhibit TX, Keying.. As on page 9 of the manual.. It
does not appear that the 998 will accept band data from any
transceiver, just goes into an automatic mode.
73,
Dudley
WA5QPZ
russ wrote:
Lee,
The 998 manual refers to the Yaesu cable with a DIN plug for band data. I
thought it might transfer that data to the 998. If so, it should be
possible to get DDutil to do the same...
Russ
On Sun, Feb 21, 2010 at 6:01 PM, Lee A Crocker <lee_croc...@yahoo.com>wrote:
I do not believe there is any way to pass band data to the MFJ 998.
73 W9OY
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/