Multiple devices can not share comports (virtual or physical) without some special logic to make sure devices or software connected to them are not in conflict.
PowerSDR has only one CAT port and only one application can use it unless you have something like DDUTIL mediating the CAT traffic. -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Michael Tondee Sent: Friday, May 07, 2010 8:05 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] BobSmeter-Flex and fldigi > For some reason BobSmeter seems to be intefering with fldigi getting CAT > info on my setup. I can turn off BobSmeter and have no issues but as soon as > I turn it on flidigi does not change frequency when I change frquency in > PowerSDR. PTT by radio command works when BobSmeter is off but not when it's > on. The only other digital program I currently have is the one in Logger32. > It has no problems at all changing frequency or with PTT by radio command > with BobSmeter running. Certainly there may be somerthing werong in my setup, > I'm just learning virtual comports. I was hoping though that someone else > might try fldigi running concurrently with BobSmeter and report what they > find. > Tnx and 73, Michael, W4HIJ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
