Im using the CW program that's built in with the Power SDR. vs 1.18.6 PC is a I7 quad core 2.8 ghz, 2 gig of ram, 1 gig Nvida graphics card. I think thats it. If you need more pls let me know. Adam N8MOX
On Thu, May 20, 2010 at 10:41 AM, Tim Ellison <telli...@itsco.com> wrote: > Can't help if we don't know what you are using for software and the radio > hardware. A description of the problem is not enough information. Also > include the PC configuration too since it is an integral part of the radio > system. > > > > -Tim > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz [mailto: > flexradio-boun...@flex-radio.biz] On Behalf Of adam grossmyer > Sent: Thursday, May 20, 2010 10:38 AM > To: flexradio@flex-radio.biz > Subject: [Flexradio] CW > > Hi guys, I have another issue I'm hoping you might be able to help out > with. I was wondering if any of you use the built in keyer on the flex. > I say about 30 % of the time I have to restart the Power sdr because I lose > the delay that keeps the transmitter keyed. Instead of the keyer staying > keyed and sending lets say 30 wpm the delay will disappear and the relay > will click every time it rekeys another series of dits and dahs. Not an > ideal setup if I am using an amp. If I restart Power SDR all is fine for a > short period of time then it will act up again. > Adam > N8MOX > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
