Bill. I'm replying only on this reflector. Don't see how this topic has much bearing on beta software.
I use a 3000 with headphones, stereo system with speakers on the wall and a Grove SP-200 communications grade speaker. The Grove speaker is driven by a DSP-599zx box, and the DSP box gets its audio from the VGA connector on the back of my 3000. Works great! I usually use the DSP box with another rig of mine, but hooked it up to the Flex because I could. Also when I'm doing CW without headphones, the communications grade speaker is much superior (with the extra DSP) than my stereo speakers. Give it a try. I enjoy it over here. Tim On Mon, Jun 7, 2010 at 12:08 PM, William H. Fite <[email protected]> wrote: > Has anyone tried using a Timewave 599zx or equivalent audio post-processor > with a Flex? Share how you managed it? The line audio out is not enough > to > drive the processor and the idea of interposing an amp--in addition to the > powered speakers--is not attractive. > > Thanks for any advice. > > > Bill > > -- > The proportions and relations of things are just as much facts as the > things > themselves. > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
