Why don't you do like I did. Cut of the connectors on the Heil Phone/Mike
and installed a new connector that fits the F5K at the front. Connections
are in the manual.
Message: 7
Date: Tue, 4 Jan 2011 22:44:14 -0600
From: "DALE HANKINS" <dhank...@comcast.net>
To: "'jim howard'" <jim_h...@yahoo.com>, "'Flexradio'"
<flexradio@flex-radio.biz>
Subject: Re: [Flexradio] Transmit Audio Distortion
Message-ID: <000601cbac93$35af6c10$a10e44...@net>
Content-Type: text/plain; charset="iso-8859-1"
I run a pr 40 into the back balance audio and into the front with a home
made adapter with no problems
-----Original Message-----
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of jim howard
Sent: Tuesday, January 04, 2011 7:20 PM
To: Flexradio
Subject: [Flexradio] Transmit Audio Distortion
5 or 6 months ago I gave up trying to use my Heil PR-40 microphone with my
Flex
5000.
Tried front panel 8 pin connector and also the rear panel balanced jack
and
both
produced distorted audio.? I am now using an old yaesu md-1 microphone
using
the
8 pin
jack with no problems.? Good audio.
I decided to try the PR-40 again.? Sent the mic and cable to Bob Heil and
they
could
find nothing wrong. The cable I'm using is a commercally made cable, not
one
that
I made up.
My question is to PR-40 users.? Did you have any problems and if so how
did
you
correct
then? ?I have tried all the fixes that I know.? Sure hate to have a good
unusable mic sitting
on the shelf.
Jim K5TC
****************************************
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
