Joe, There are several ways you can do this, I'll give you a couple of easy ways, others will have suggestions too..
One quick way is to run a male to male 3.5 mm stereo cable from the Power Speaker output to your soundcard input, then set the video capture to the soundcard input. Or you can use the Line Out with a Y connector to a stereo 3.5 mm for the soundcard input. Another way is to set the VAC output settings in the Audio tab of Setup menu of PowerSDR to Soundmapper or your sound card input, and like the setup above, set the program to soundcard input.. But doing this will mess up your digital settings for VAC. If this is the case, leave VAC set for Virtual lines, and use the VAC Repeater, which can be set to the VAC out for input and Soundcard input, etc.. Hope this helps. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com <dud...@flex-radio.com> Web: www.flexradio.com <http://www.flex-radio.com> <a href="http://www.crossloop.com/FlexRadioSupport?type=email" target="_blank"><img border="0" src=" http://www.crossloop.com/images/badge-sm-gray.jpg" alt="Get help from Dudley Hurry!"/></a> On Mon, Jan 24, 2011 at 7:34 PM, Joe <kc...@comcast.net> wrote: > I was working the VHF contest this past weekend and wanted to capture some > signal displays from the Panadapter. > > > > There are a number of utilities that would appear to do the job, but when > tried, I find the audio portion of the video is NOT captured. > > > > I've tried CamStudio and Super Screen Recorder and neither captured the > audio. > > > > I figured since the Flex has it's own audio output and does NOT use the > speaker output from the computer that this is the cause. > > > > The tools I was using apparently look for "computer speaker outputs" and > I'm > not using the speaker output from the computer. Since I was running VAC and > those audio connections showed up in the tools menus I figured it should > work. > > Well I guess NOT. Still can't get audio. > > > > Does anyone have a method to capture BOTH video and audio using the Flex? > > I guess I could use a microphone and plug it into the computer. > > > > Thanks, Joe - KC2TN > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/