On Thu, Feb 10, 2011 at 11:55 AM, Ted Trostle <[email protected]> wrote:
> The Knowledge Base article > http://kc.flexradio.com/KnowledgebaseArticle50494.aspx clearly explains > the > good and bad of proper use of ALC on the Flex radios in SSB mode. > > What are the general guidelines when in say BPSK31 or RTTY mode operation? > I normally run with my signal set to -2dB on the ALC indication for digital modes. That limits maximum power to about 65W but gives good IMD for modes with an amplitude component, e.g. PSK31, PACTOR, etc. After that I use the drive control to set actual desired power output. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 [email protected] +1.767.617.1365 (Dominica) +1.931.492.6776 (USA) (+1.931.4.WB6RQN) _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
