No, not a laptop. Desktop HP, specs stated below in original post. It
had four USB ports on the back and two on the front. All appear to be on
"hub 0" from my testing. One device listed that I'm not sure what it
is, it's not something I can physically plug and unplug, is listed on
"hub 1" Generally speaking, the only devices physically plugged into USB
during radio operation would be the MS keyboard, a Prolific USB to
serial adapter that goes to my homebrew Basic Stamp based rotator
control box and the radio itself. So far, in very limited testing the
only bad behavior I have noticed so far is a tendency for PSDR audio to
cut out and the panadapter display to freeze every once in awhile for
varying lengths of time but it usually comes back. This is with the
keyboard and radio connected. Have not gotten far enough to try the
rotator controller yet. Also have not really played with tweaking any
settings yet.
I'm very attached to this particular type of keyboard, it is called a
"comfort curve" keyboard and I'm so spoiled by it that I have a hard
time typing on a straight keyboard. Unfortunately, as far as I know,
it's only available with a USB connection and not the more traditional
mini DIN type. I have not been able to lay my hands on the USB card I
have but I'd have no problem purchasing another PCI based one if that
would give me the separate hub that I need to avoid issues. I don't have
any available PCIE slots so it would have to be PCI only.
73,
Michael
On 2/11/2011 5:31 AM, Tim Ellison wrote:
The FLEX-1500 is a USB 1.1 device so you would be OK. Is the PC by chance a
laptop?
-Tim
-----Original Message-----
From: Michael Tondee [mailto:[email protected]]
Sent: Friday, February 11, 2011 12:38 AM
To: Tim Ellison
Cc: [email protected]
Subject: Re: [Flexradio] 1500 on the way today...USB concerns?
Did some testing and apparently my PC has only one USB hub or only one that is available to me. No matter where I hook up the
1500 or the keyboard in my available front and rear panel USB ports, they both always come up on "Hub 0" There is a
device that says it is "mass storage" showing hooked up to "Hub 1" but I have no idea what it is or how to
access "Hub 1". I have no USB drives or anything of that nature unless it's the SD card reader ports or the "HP
pocket media drive bay"
on the front panel of the computer. I think I have an old USB PCI card lying
around here somewhere but I'd bet anything it's USB 1.1 if I could even lay
hands on it.
73,
Michael
On 2/10/2011 1:17 PM, Tim Ellison wrote:
Unless you have a "soft" USB controller that seem to crop up in some of the new
"I" versions of Intel processors, the only thing of real concern with USB is to make sure
you do not have a low speed polling device (keyboard/ mouse) or a very high bandwidth USB device
like a Wireless card or hard drive connected to the same USB controller as the FLEX-1500.
You want to look at this KB article
http://kc.flexradio.com/KnowledgebaseArticle50459.aspx
If you do have one of the "soft" USB controllers, then there are some
enhancements in the upcoming beta version of PowerSDR that help mitigate the controller
issues.
-Tim
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Michael Tondee
Sent: Thursday, February 10, 2011 12:44 PM
To: [email protected]
Subject: [Flexradio] 1500 on the way today...USB concerns?
I'm waiting on my 1500 to be delivered today. Meantime, I've been reading the
forums and scouting around in the KB articles. I've read a couple of things
about USB issues that give me pause.
MY PC is an HP a6333w desktop with an Athlon 64 X2 4800+ 2.5Ghz processor..
Chipset is identified as GEforce 6150SE n Force430. It has 3GB of memory and
is running 32 bit Windows 7. It has USB 2.0 and I use a MS comfort curve 2000
keyboard that hooks up through USB. I have added a dual port PCIE video card
that I believe has an Nvidia processor. This PC performed near flawlessly
through a firewire hookup to a 5k but I have been unable to garner much info
on it as far as how the USB controller is configured, perhaps I'm not looking
in the right place. The device manager doesn't really seem to give that much
info.
I'm not trying to borrow trouble here but I read something in a post
about the fact that a USB keyboard hooked to the same controller as
the
1500 could slow the USB speed down and cause issues with the 1500. Any thoughts
or am I just jumping the gun a bit here?
_
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
