On cw it look like there is a small delay when the amp meter on the psu is any one test this one When I tx on cw and look on the amp meter of my daiwa psu there is a very small delay when it go back I may be wrong but this the way it look ///when this is going for cw to stand byany one can test this as well please
E.P --- On Tue, 1/3/11, paim <[email protected]> wrote: From: paim <[email protected]> Subject: Re: [Flexradio] Firmware bug cw amp on the psu To: "Ed Stallman" <[email protected]>, "Gerald Youngblood" <[email protected]> Cc: "Reflector" <[email protected]> Date: Tuesday, 1 March, 2011, 15:37 On cw it look like there is a small delay when the amp meter on the psu is any one test this one When I tx on cw and look on the amp meter of my daiwa psu there is a very small delay when it go back I may be wrong but this the way it look any one can test this as well please E.P --- On Tue, 1/3/11, Gerald Youngblood <[email protected]> wrote: From: Gerald Youngblood <[email protected]> Subject: Re: [Flexradio] Firmware bug on FLEX-5000 and FLEX-3000 running PowerSDR v2.0.19 RC1 To: "Ed Stallman" <[email protected]> Cc: "Reflector" <[email protected]> Date: Tuesday, 1 March, 2011, 14:46 Ed, This is the final and only issue we are working on to cut a new release. As to time frame, that is unpredictable for intermittent problems but I am sure we can find it fairly soon. The fact that it did not occur in 1.18.6 or prior to 2.0.17 gives us the ability to compare the code. They guys are fully focused on the issue so I am sure they will nail it. We will go through a closed beta cycle to make sure we did not create new bugs before we go to public release. 73, Gerald Gerald Youngblood, K5SDR President and CEO FlexRadio Systems(TM) 13091 Pond Springs Road, #250 Austin, TX 78729 Phone: 512-535-4713 Ext. 202 Email: [email protected] Web: www.flexradio.com <http://www.flex-radio.com/> Tune In Excitement (TM) PowerSDR(TM) is a trademark of FlexRadio Systems On Tue, Mar 1, 2011 at 7:33 AM, Ed Stallman <[email protected]> wrote: > Hello Gerald and the group > > > >We have received a handful of reports of intermittent and random lock up > >failures on the FLEX-5000 running PowerSDR v2.0.19 RC1. > > > > Using the Flex 5000a , RX2, PSDR 2.0.1.9, quad core > > I'm having the lockup problem , while sending CW , sometimes it will lock > sending a CW tone until I can get PSDR shut down ! > I know I can revert back to 2.0.1.6 but being a CW op and 19 doing CW so > well , I just hate to go Back. > So my question is , will it take much time to fix the I2C control code in > the new Firmware > > Thanks Ed > > > > > > > > > At 01:43 PM 2/26/2011, Gerald Youngblood wrote: > > Dear FLEX-5000 customers, > > We have received a handful of reports of intermittent and random lock up > failures on the FLEX-5000 running PowerSDR v2.0.19 RC1. > > The symptoms can be as follows: > > 1. Failure to return to receive after transmit, which is usually > > corrected by keying the radio. > 2. Intermittent failure to transmit power. > 3. Random failure to tune the receiver. > > > This morning we determined that there is a random timing related bug in the > I2C control code on the FLEX-5000. We are putting top priority on > resolving > the issue as soon as possible. This is one of the final few bugs that need > to be addressed before PowerSDR 2.0 goes to official release status. > Thanks > to those of you who reported and helped us to quantify the symptoms. > > If you are having any the above noted problems, you have the option to go > back to v2.0.16 or v1.18.6 until we resolve the problem. If reverting to > v2.0.16, you will need to manually reinstall v2.0.7.0 firmware for the > FLEX-5000. PowerSDR v1.18.6 requires firmware version 1.3.0.8. > > Our team sincerely appreciates the overwhelming positive response to > v2.0.19 > RC1 we have received from so many of you. > > 73, > Gerald > > > Gerald Youngblood, K5SDR > President and CEO > FlexRadio Systems(TM) > 13091 Pond Springs Road, #250 > Austin, TX 78729 > Phone: 512-535-4713 Ext. 202 > Email: [email protected] > Web: www.flexradio.com <http://www.flex-radio.com/> > > > Tune In Excitement (TM) > > PowerSDR(TM) is a trademark of FlexRadio Systems > _______________________________________________ > FlexRadio Systems Mailing List > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: > http://www.mail-archive.com/flexradio%40flex-radio.biz/<http://www.mail-archive.com/[email protected]/> > Knowledge Base: http://kc.flexradio.com/ > <http://kc.flexradio.com/%A0>Homepage: > http://www.flexradio.com/ > > __________ Information from ESET NOD32 Antivirus, version of virus > signature database 5910 (20110226) __________ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com > > _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
