You beat me to it, Neal.  I've seen same prob, used same fix.


On Sun, Mar 6, 2011 at 11:48 AM, Neal Campbell <abrohamn...@gmail.com>wrote:

> I have seen this myself. You can see it frequently when you add a serial
> port card and the computer assigns the new ports as Comm3, etc. If you go
> into the advanced properties on the device entry for the port and reassign
> the comm port, you will see an asterick by Comm1 which means its already
> assigned. Unless you actually have a comm 1, its okay to reassign a comm
> port to comm port 1, just reboot afterwards and it will come up okay.
>
> 73
>
> On Sun, Mar 6, 2011 at 9:32 AM, Joe Camilli <joen7...@gmail.com> wrote:
>
> > I attached a couple screen shots that may help explain the issue. On the
> > advanced screen several com ports show in use but in device manager they
> do
> > not show up at all.
> >
> > On Sat, Mar 5, 2011 at 11:43 PM, Bret Mills <bmil...@ecso.com> wrote:
> >
> > > Not being sure of your circumstances or programs on your computer but
> > here
> > > goes.
> > >
> > > Are you running VSP Manager or COM-0-COM on your installation?
> > >
> > > If you are running either of these two COM port programs then this may
> be
> > > where your COM ports are coming from and are required if you run DDUTIL
> > or
> > > more then one Digital / Logger program using PowerSDR that require COM
> > > Ports.
> > >
> > > What do these COM ports show in the Windows Device manager?
> > > If this shows "ELTIMA Virtual Serial Port" then it's VSP Manager and
> you
> > > can
> > > run VSPMgr to uninstall these COM ports.
> > >
> > > I don't remember what COM-0-COM ports label there VCOM ports as but it
> > > should say "Virtual Serial Port" in which case you would use COM-0-COM
> to
> > > uninstall those COM ports.
> > >
> > > If either of these are the case you will have that program installed on
> > > your
> > > PC.
> > >
> > > The other options are USB to Serial Port Hardware devices which will go
> > > away
> > > as soon as you unplug the USB Connector from the computer.
> > >
> > > BE CAREFUL when you start un-installing these devices and make sure
> some
> > > your equipment peripherals and other software doesn't require these to
> > talk
> > > to the FLEX.
> > >
> > > 73's
> > > Bret
> > > WX7Y
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: flexradio-boun...@flex-radio.biz
> > > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Joe Camilli
> > > Sent: Saturday, March 05, 2011 7:49 PM
> > > To: Flexradio
> > > Subject: [Flexradio] Serial Ports
> > >
> > > I have several "comm ports" that windows says are in use but nothing
> > shows
> > > as connected to them. I am running W7 64 bit. Looking for some input on
> > how
> > > I can release these ports to be used by other programs?
> > >
> > > Thanks Joe N7QPP
> > > _______________________________________________
> > > FlexRadio Systems Mailing List
> > > FlexRadio@flex-radio.biz
> > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> > > Knowledge Base: http://kc.flexradio.com/  Homepage:
> > > http://www.flexradio.com/
> > >
> > > --
> > > This message has been scanned for viruses and dangerous content by
> > > MailScanner, and is believed to be clean.
> > >
> > >
> > > --
> > > This message has been scanned for viruses and
> > > dangerous content by MailScanner, and is
> > > believed to be clean.
> > >
> > >
> > _______________________________________________
> > FlexRadio Systems Mailing List
> > FlexRadio@flex-radio.biz
> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> > Knowledge Base: http://kc.flexradio.com/  Homepage:
> > http://www.flexradio.com/
> >
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to