There is a known issue with PowerSDR 2.0.x related to the ANT display on the front of the console being out of sync and/or incorrect. Please refer to the settings in the Antenna Menu form for a more accurate description of the ANT configuration state.
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Michael Gullo Sent: Sunday, March 20, 2011 10:36 PM To: [email protected] Subject: [Flexradio] Front panel display I noticed a video on a post abt 3 weeks ago that showed on the Flex front panel, an antenna selection for rx and tx that displayed: xvtr/com and not ant1. I am using a DEMI 144-28 xvtr on a Flex 5000A through the xvtr/com port and get Ant 1 as the display. I cannot find an option to choose xvtr/com in the antenna form. Where can that be selected? Running XP and 2.0.20 RC2. Tnx. 73, Mike - WB2RVX FM29mt _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
