Does he have a 64 Bit signed version of 4.09? The copy I have is not signed.
Mike VA3MW On Tue, May 3, 2011 at 1:13 PM, Keith Goobie <ke...@goobie.org> wrote: > All, > > Go to the link provided when purchasing 410 and substitute 409 and voila. > > Keith > > > On 5/3/11 9:14 AM, "Tim Ellison" <telli...@itsco.com> wrote: > > > See my comments below > > > > > > -Tim > > > > > > -----Original Message----- > > From: flexradio-boun...@flex-radio.biz > > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bob Towers > > Sent: Tuesday, May 03, 2011 8:53 AM > > To: flexradio@flex-radio.biz > > Subject: [Flexradio] VAC 4.10 > > > > I've recently bought a Flex-1500, initially to give SDR QSO-ing a try and > now > > I'm hooked. Almost all my QSOs are digital, so I realize I'll need VAC. > > [Tim] You don't really "need" it, but it makes no sense to transfer audio > to > > and from PowerSDR and the digital mode program using a physical sound > card. > > > > I've tried 4.09 and it works reasonably well, except for some latency > issues > > (audio card or PowerSDR settings?). > > [Tim] There is always a latency process with audio transfer. All > components > > contribute to the overall latency. > > > > The audio outputs to MixW appear to be band dependent > > [Tim] Really? I just set the IO channels to VAC and they do not change > UNLESS > > you initialize a new sound card (physical or virtual) in Windows that > changes > > the audio device ID number. > > > > ... and I have to adjust the RX gain in PowerSDR to compensate, which is > a bit > > of a drag. Is this normal? > > [Tim] All bands will have different output gain characteristics due to > band > > conditions. Higher bands generally are less noisy than lower frequency > bands. > > There is no "output gain normalization" process in PowerSDR; the signal > > characteristics you are receiving is the actual signal. So yes, this is > > normal, per se. > > > > I plan to buy VAC 4.09 but I see from the purchasing page I only appear > to be > > able to buy 4.10, not 4.09. > > [Tim] Yes, that is correct. > > > > Maybe I'm missing something, or do I then ask for 4.09, having bought > 4.10? > > [Tim] That is the correct process. Once you have purchased 4.10 you can > > request 4.09 from VAC support (Eugene) and he will instruct you on how to > get > > it. Make sure you ask for the digitally signed version if you are using > > 64-bit Vista or Win7 > > > > Also, is the license for a single installation or is it licensed to me so > that > > I can use it, for instance, when I use a laptop for static mobile > operations? > > [Tim] I don't want to make any statements regarding other developers > license > > agreements. If you have the 4.10 demo version installed, you have a copy > of > > the software license. Look in the Help file for the section on > Distribution > > Policy. > > > > Thanks in advance > > > > Bob Towers > > MM0RKT > > > > > > > > _______________________________________________ > > FlexRadio Systems Mailing List > > FlexRadio@flex-radio.biz > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > > > > _______________________________________________ > > FlexRadio Systems Mailing List > > FlexRadio@flex-radio.biz > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > > -- > Keith Goobie > ke...@goobie.org > Richmond Hill, Ontario > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/