Tim, ...OK, two resets later, it passes no audio at least one out of every four times I start PSDR - this after doing the oft recommended DC-off-for-several-minutes routine. That's why I'm wondering if the newer firmware, which is the only difference at this point, can be rolled back.
Thanks, WX4L On Mon, Jun 6, 2011 at 8:48 PM, Tim Ellison <telli...@itsco.com> wrote: > There is no "roll back" process. You just run 2.0.22. Versions are > installed independently. > > Do a return to Factory Defaults (DB reset) and see if that resolves the > audio issues. > > > -Tim > > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz [mailto: > flexradio-boun...@flex-radio.biz] On Behalf Of russ > Sent: Monday, June 06, 2011 8:44 PM > To: flexradio@flex-radio.biz > Subject: [Flexradio] firmware rollback > > Is there a way to roll back the firmware (2.1RC3 to 2.0.22) as I have > uninstalled RC3 and, upon returning to 2.0.22, half the time PSDR powers up > I have no receive audio. > > F5KA > Win7 64 > showing FW 2.0.15.6 > > Thanks, > WX4L > -- > russ > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > -- russ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
