Once you have the FlexControl installed and operational, then there is
nothing you should need to do other than making sure you select the
FlexControl as one of the device install options to ensure you have the
latest driver. It should not change its comport assignment to conflict
with another virtual comp port device which is the root cause of the
initial set up issue,
-Tim
---
Tim Ellison, W4TME
Internet Systems Admin. & Customer Support Engineer
FlexRadio Systems^(TM)
4616 W Howard Ln Ste 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com <mailto:t...@flexradio.com>
Web: www.flexradio.com <http://www.flexradio.com>
logo
/Tune In Excitement^(TM)
PowerSDR^(TM) is a trademark of FlexRadio Systems/
On 7/23/2011 7:46 AM, Michael Therrien wrote:
Does the FlexControl errata guidance on VSPMgr still apply if upgrading
software/drivers from RC3 to 2.1.5? I comprehended the guidance when
initially installing FlexControl going from 2.0.22 to RC3 but am unsure
whether the same procedure needs to be applied going to the new PSDR 2.1.5
from RC3.
Many thanks,
Mike, N1MD
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
