John, For CW Skimmer, also check the VAC Direct I/Q Output to VAC in the Audio VAC setup.
Within CW Skimmer setup, do not check VAC 1 for "Audio I/O". Put this to your PC audio path, if anything at all. This is meant for monitoring the output audio of CW Skimmer itself and really not necessary. You only need the input to CW Skimmer from VAC, with the Direct I/Q checked and VAC Enabled. I am not able to operate CW Skimmer with the Driver as Windows WDM-KS, only with the Driver set as MME. I think others have been able to operate with WDM-KS and CW Skimmer, so something with my PC there. CW Skimmer operates very well with PowerSDR. 73 John N3WT -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Vandenberg Sent: Tuesday, November 08, 2011 10:50 PM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer Anyone knows how to setup CW SKIMMER on F5K? The CAT seems to work, but don't see any white noise or CW (yes VAC is enabled My setup PowerSDR VAC driver MME, Input Vac1, Output Vac2, Enable Vac is Checked, Buffer size 512 Sample rate 48000 CW Skimmer driver MME signal I/O device: Vac2 Audio I/O device: Vac1 Channels: Left/Right = I/Q Shift Right Sample data: 0 samples Any help appreciated... John, ve3dvv _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/