Hi Folks,
I have a 5K that I'm trying to get the Array Solutions Bandmaster III to work
with. I've got DDu til instralled, running, and set up to read out frequency
data to the passive listening port. I've read the Bandmaster documentation and
have DDutil set to provide the Kenwood protocol and have set up the B andmaster
III to respond to the Kenwood protocol. I believe I have the interconnect
cable correct but was wondering if I needed a null modem cable instead of the
regular cable. I've got pin 2 from the DB-9 on the Bandmaster going to pin 2
on the DB-9 connector on the serial card. Pin 3 to pin 3 also as well as
ground.
It's not working. The Bandmaster doesn't seem to see the data from DDutil. I
have serial PCI card installed with the lastest driver and COM ports correctly
assigned, I think. Any ideas?
Thanks!
Chuck K1KW
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
