Use RX2 In and then you can receive on both simultaneously if you also
have a transmit antenna on your main receiver via ANT 1,2 or 3..
On 2/13/2012 6:54 PM, vtnn...@comcast.net wrote:
It does work if I put the loop on Receiver 1 and pick RX1 IN but if I have an
antenna on ANT1 I get no signal at all when I pick ANT1 in Receiver 2 which is
very weird. ----- Original Message -----
From: "Brian Lloyd"<brian-wb6...@lloyd.com>
To: vtnn...@comcast.net
Cc: "Flex Radio"<flexradio@flex-radio.biz>
Sent: Monday, February 13, 2012 7:35:12 PM
Subject: Re: [Flexradio] How can I put a RX only antenna with a preamp on RX1?
On Mon, Feb 13, 2012 at 4:32 PM,< vtnn...@comcast.net> wrote:
I would like use a Pixel RX only loop that has a preamp in it a s a RX only
antenna in RX1. Is there a way that I could this be assured that I would not TX
into it and blow up the preamp?
Plug it into the RX1 input and then select that for your receive antenna on RX1.
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
