A ground mounted vertical is an invitation for rf in the shack as well as in all of the other rooms. Even 100 watts from a ground mounted vertical places a huge rf field all around the house. This can be proven using an rf signal strength meter and measuring the radiated field strength from a vertical and then measure the field from a horizontal antenna. If a vertical is working correctly it has a very low angle of radiation.....right thru your house. Verticals installed well away from the shack keep the field strength in the shack at much lower levels.
Sent from my iPhone On Feb 25, 2012, at 12:00 PM, flexradio-requ...@flex-radio.biz wrote: > Send FlexRadio mailing list submissions to > flexradio@flex-radio.biz > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > or, via email, send a message with subject or body 'help' to > flexradio-requ...@flex-radio.biz > > You can reach the person managing the list at > flexradio-ow...@flex-radio.biz > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of FlexRadio digest..." > > > Today's Topics: > > 1. Re: Power Button Sticks 5000A (W6SDM Steve) > 2. Behringer DEQ2496 RFI Spikes (Mark Weidhaas) > 3. Re: New Release (W6SDM Steve) > 4. Re: New Release (Tim Ellison, W4TME) > 5. New Release (Guy WR7K) > 6. Re: New Release (Tim Ellison, W4TME) > 7. Re: New Release (Ross Stenberg) > 8. Re: New Release ( Robert Costa, KB6QXM ) > 9. Re: New Release (Lee Mushel) > 10. Re: New Release (William H. Fite) > 11. Re: New Release (Tim Ellison, W4TME) > 12. Re: Behringer DEQ2496 RFI Spikes (Chuck ONeal) > 13. Re: New Release (Chuck ONeal) > 14. New Release (Don) > 15. Re: New Release (k3...@qsl.net) > 16. Re: New Release (Hanford R Wright) > 17. Re: New Release (Lee Mushel) > 18. PowerSDR fails to start, has errors (Dale Taylor) > 19. Re: PowerSDR fails to start, has errors (Hanford R Wright) > 20. Re: PowerSDR fails to start, has errors (Dale Taylor) > 21. Re: New Release (N7BCP) > 22. Re: 472-479 KHz receiving and transmitting ERP and antenna > models (Robert McGwier) > 23. Rough audio (John C. Fraser) > 24. Re: New Release (Bernie Huth) > 25. Re: Rough audio (Jim Jannuzzo) > 26. Vista/7 conversion (ROGER SCHMITT) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 24 Feb 2012 12:33:20 -0700 > From: W6SDM Steve <dd.maricopa...@gmail.com> > To: flexradio@flex-radio.biz > Subject: Re: [Flexradio] Power Button Sticks 5000A > Message-ID: > <caatbxpbbgfu7mgiibkz+4zatg3usobztblsrp1sxt5s1451...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Sticky power button in the Flex 5000? Guess I will have to check mine. > It's never been turned off since I got it. :) > > -- > Steve Miller > w6sdm.net > > > ------------------------------ > > Message: 2 > Date: Fri, 24 Feb 2012 12:43:25 -0700 > From: "Mark Weidhaas" <mweidh...@cox.net> > To: <flexradio@flex-radio.biz> > Subject: [Flexradio] Behringer DEQ2496 RFI Spikes > Message-ID: <4D34D6D1BC954AD381C9282B05638001@MWPC> > Content-Type: text/plain; charset="us-ascii" > > I have tried cheater plugs with no luck. I have ferrites on everything. I > have chokes on my antenna line, both directly outside my shack and at the > 33' vertical antenna base. If I lay my mic / headset on my desk, the spikes > go away. As soon as I touch the headsets, the spikes come back. I use a Heil > foot switch for PTT. I even tried audio transformers on both the headset > audio and mic inputs. It seems "I am in the ground loop"...... > > Original Post > > <I have been trying to integrate a Behringer DEQ2496 into my audio chain > with my Flex 5000A. My shack is on the second floor of my house so RFI is a > constant problem. Using only my Behringer Xenyx802 mixer board and my 5000A > there are no major RFI problems. I have isolated the 802 from the ballanced > line input on the 5000A with a Jensen JT-11P-1 audio transformer. When I add > the DEQ2496 I get an RFI spike at about 2~3 Hz. I can see the spike on both > the 5000A panadapter and on an oscilloscope tapped at my 811H amp output. I > have tried various audio isolation techniques but no joy. The spiking is the > most pronounced with the amp on. Has anyone encountered this issue and > solved this problem ? if so please advise.> > > > Mark Weidhaas > W7MGW > TRA 11810 / NAR 87698 / L3 > Mobile: (602) 300-5114 > mweidh...@cox.net > > > > ------------------------------ > > Message: 3 > Date: Fri, 24 Feb 2012 13:01:07 -0700 > From: W6SDM Steve <dd.maricopa...@gmail.com> > To: flexradio@flex-radio.biz > Subject: Re: [Flexradio] New Release > Message-ID: > <caatbxpzq18jrwx5wfsttsekfry7ndbo7-ep2f53ht_sh5b0...@mail.gmail.com> > Content-Type: text/plain; charset=windows-1252 > > I was digging through a dumpster out behind the Flex Radio offices and came > upon the following information scrawled on a notepad, heavily stained by > what looked like a chili-cheese burrito. It appears that these forward > looking statements may give us some insight into what to expect from the > next release of power SDR. > > > > Integrated data decoder utility very much like DDUtil only with 32 control > ports and the ability to switch between three different rigs. The rotor > control window also has settings to interface with a garage door opener and > a beer dispenser. > > > > Voice to CW converter. When the selected mode is USB or LSB and VFO-A is > in the CW portion of any band, speak into the mic and PSDR sends out > perfect code, speed and weight adjustable by the operator. No-code extras > will now be know-code extras. > > > > Automatic Error Detection with Instant Online Support. As soon as a crash > or error is detected, a Skype video call is instantly made by PSDR to Tim > or Dudley?s office, home, or cell phone. You don?t even need to be in the > shack ? Team Viewer pops up and they just fix whatever went wrong, sending > you an e-mail when it?s all better. > > > Support for a new wireless Flex Control device identical to the Nintendo > Wii. Now you can work that 20-meter pileup and take a few inches off that > gut at the same time. > > > > So there you have it. ICOM, Yaesu, and Kenwood owners eat your heart out! > > > > 73, > > > Steve > > -- > Steve Miller > w6sdm.net > > > ------------------------------ > > Message: 4 > Date: Fri, 24 Feb 2012 15:03:49 -0500 > From: "Tim Ellison, W4TME" <t...@flex-radio.com> > To: flexradio@flex-radio.biz > Subject: Re: [Flexradio] New Release > Message-ID: <4f47ed25.1040...@flex-radio.com> > Content-Type: text/plain; charset=windows-1252; format=flowed > > That requires a direct payment to my PayPal account :-) > > Tim Ellison, W4TME > Product Management, Sales & Support > FlexRadio Systems? > 4616 W Howard Ln, Suite 1-150 > Austin, TX 78728 > Phone: 512-535-4713 Ext. 223 > Email: t...@flexradio.com <mailto:t...@flexradio.com> > Web: www.flexradio.com <http://www.flexradio.com> > > logo > > > On 2/24/2012 3:01 PM, W6SDM Steve wrote: >> Automatic Error Detection with Instant Online Support. As soon as a crash >> or error is detected, a Skype video call is instantly made by PSDR to Tim >> or Dudley?s office, home, or cell phone. You don?t even need to be in the >> shack ? Team Viewer pops up and they just fix whatever went wrong, sending >> you an e-mail when it?s all better. > > > ------------------------------ > > Message: 5 > Date: Fri, 24 Feb 2012 13:22:56 -0700 > From: "Guy WR7K" <driv...@accima.com> > To: flexradio@flex-radio.biz > Subject: [Flexradio] New Release > Message-ID: <B2190D1A5E714E979A032F085215A962@WR7KHP> > Content-Type: text/plain; charset="iso-8859-1" > > I heard from a little bird that the new 60M band will be available on 3/5 and > should be an update for that on the same date....guy > > ------------------------------ > > Message: 6 > Date: Fri, 24 Feb 2012 16:17:04 -0500 > From: "Tim Ellison, W4TME" <t...@flex-radio.com> > To: flexradio@flex-radio.biz > Subject: Re: [Flexradio] New Release > Message-ID: <4f47fe50.1060...@flex-radio.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Your bird is correct. We plan to make the new release that has the new > 60m privileges available @ 12:01AM ET on 5-March-2012 > > Tim Ellison, W4TME > Product Management, Sales & Support > FlexRadio Systems^(TM) > 4616 W Howard Ln, Suite 1-150 > Austin, TX 78728 > Phone: 512-535-4713 Ext. 223 > Email: t...@flexradio.com <mailto:t...@flexradio.com> > Web: www.flexradio.com <http://www.flexradio.com> > > logo > > > On 2/24/2012 3:22 PM, Guy WR7K wrote: >> I heard from a little bird that the new 60M band will be available on 3/5 >> and should be an update for that on the same date....guy >> _______________________________________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > > > ------------------------------ > > Message: 7 > Date: Fri, 24 Feb 2012 15:59:20 -0600 > From: Ross Stenberg <ross.stenb...@charter.net> > To: flexradio@flex-radio.biz > Subject: Re: [Flexradio] New Release > Message-ID: <4f480838.1060...@charter.net> > Content-Type: text/plain; charset=windows-1252; format=flowed > > I would suggest that they adopt the Xbox 360 Kinect interface for motion > sensing and voice control of all PowerSDR functions. > >>>> Support for a new wireless Flex Control device identical to the > Nintendo Wii. Now you can work that 20-meter pileup and take a few > inches off that gut at the same time. > > > > ------------------------------ > > Message: 8 > Date: Fri, 24 Feb 2012 14:32:46 -0800 > From: " Robert Costa, KB6QXM " <kb6...@yahoo.com> > To: t...@flexradio.com,flexradio@flex-radio.biz > Subject: Re: [Flexradio] New Release > Message-ID: <124585.66904...@smtp104.mail.gq1.yahoo.com> > Content-Type: text/plain; charset=utf-8 > > Tim, > > Will there be anything else in the software or is it policy not to discuss > that until release? Bug fixes, new features? > > 73, > Robert > KB6QXM > "Ham Radio Open Conversation" > Yahoo group owner/moderator > > > ----- Reply message ----- > From: "Tim Ellison, W4TME" <t...@flex-radio.com> > To: <flexradio@flex-radio.biz> > Subject: [Flexradio] New Release > Date: Fri, Feb 24, 2012 1:17 pm > > > Your bird is correct. We plan to make the new release that has the new > 60m privileges available @ 12:01AM ET on 5-March-2012 > > Tim Ellison, W4TME > Product Management, Sales & Support > FlexRadio Systems^(TM) > 4616 W Howard Ln, Suite 1-150 > Austin, TX 78728 > Phone: 512-535-4713 Ext. 223 > Email: t...@flexradio.com <mailto:t...@flexradio.com> > Web: www.flexradio.com <http://www.flexradio.com> > > logo > > > On 2/24/2012 3:22 PM, Guy WR7K wrote: >> I heard from a little bird that the new 60M band will be available on 3/5 >> and should be an update for that on the same date....guy >> _______________________________________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > > ------------------------------ > > Message: 9 > Date: Fri, 24 Feb 2012 16:50:05 -0600 > From: "Lee Mushel" <herbe...@centurytel.net> > To: "Ross Stenberg" <ross.stenb...@charter.net>, > <flexradio@flex-radio.biz> > Subject: Re: [Flexradio] New Release > Message-ID: <7DDBC9EFBA334B77B52E761035ED9F16@NewComputer> > Content-Type: text/plain; format=flowed; charset="iso-8859-1"; > reply-type=response > > Why not a "knob option" to replace that featureless front panel and by all > means get rid of that panadapter stuff which does nothing but trigger > jealousy and bad feelings. > > Lee K9WRU > ----- Original Message ----- > From: "Ross Stenberg" <ross.stenb...@charter.net> > To: <flexradio@flex-radio.biz> > Sent: Friday, February 24, 2012 3:59 PM > Subject: Re: [Flexradio] New Release > > >> I would suggest that they adopt the Xbox 360 Kinect interface for motion >> sensing and voice control of all PowerSDR functions. >> >>>>> Support for a new wireless Flex Control device identical to the >> Nintendo Wii. Now you can work that 20-meter pileup and take a few inches >> off that gut at the same time. >> >> _______________________________________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flexradio.com/ Homepage: >> http://www.flexradio.com/ >> >> > > > > > > ------------------------------ > > Message: 10 > Date: Fri, 24 Feb 2012 18:00:03 -0500 > From: "William H. Fite" <omni...@gmail.com> > To: Lee Mushel <herbe...@centurytel.net> > Cc: flexradio@flex-radio.biz > Subject: Re: [Flexradio] New Release > Message-ID: > <cany2ixq_dljlqrmz7axcf40semhg2o8geg-khwvq_dpxhhb...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I think you can provide that knob-on-the-front option, can't you, Lee? > > > > On Fri, Feb 24, 2012 at 5:50 PM, Lee Mushel <herbe...@centurytel.net> wrote: > >> Why not a "knob option" to replace that featureless front panel and by all >> means get rid of that panadapter stuff which does nothing but trigger >> jealousy and bad feelings. >> >> Lee K9WRU >> ----- Original Message ----- From: "Ross Stenberg" < >> ross.stenb...@charter.net> >> To: <flexradio@flex-radio.biz> >> Sent: Friday, February 24, 2012 3:59 PM >> Subject: Re: [Flexradio] New Release >> >> >> >> I would suggest that they adopt the Xbox 360 Kinect interface for motion >>> sensing and voice control of all PowerSDR functions. >>> >>>>>> Support for a new wireless Flex Control device identical to the >>> Nintendo Wii. Now you can work that 20-meter pileup and take a few inches >>> off that gut at the same time. >>> >>> ______________________________**_________________ >>> FlexRadio Systems Mailing List >>> FlexRadio@flex-radio.biz >>> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz> >>> Archives: >>> http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/> >>> Knowledge Base: http://kc.flexradio.com/ Homepage: >>> http://www.flexradio.com/ >>> >>> >>> >> >> >> ______________________________**_________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz> >> Archives: >> http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/> >> Knowledge Base: http://kc.flexradio.com/ Homepage: >> http://www.flexradio.com/ >> > > > ------------------------------ > > Message: 11 > Date: Fri, 24 Feb 2012 18:38:02 -0500 > From: "Tim Ellison, W4TME" <t...@flex-radio.com> > To: "Robert Costa, KB6QXM" <kb6...@yahoo.com> > Cc: flexradio@flex-radio.biz, t...@flexradio.com > Subject: Re: [Flexradio] New Release > Message-ID: <4f481f5a.1050...@flex-radio.com> > Content-Type: text/plain; charset=UTF-8; format=flowed > > There are new goodies in PowerSDR v2.3.x. And bug fixes too. I have > let a few of them out of the bag on the FlexRadio Enthusiasts Facebook > page (http://www.facebook.com/groups/flexradio/) > > Tim Ellison, W4TME > Product Management, Sales & Support > FlexRadio Systems? > 4616 W Howard Ln, Suite 1-150 > Austin, TX 78728 > Phone: 512-535-4713 Ext. 223 > Email: t...@flexradio.com <mailto:t...@flexradio.com> > Web: www.flexradio.com <http://www.flexradio.com> > > logo > > > On 2/24/2012 5:32 PM, Robert Costa, KB6QXM wrote: >> Tim, >> >> Will there be anything else in the software or is it policy not to >> discuss that until release? Bug fixes, new features? >> >> 73, >> Robert >> KB6QXM >> "Ham Radio Open Conversation" >> Yahoo group owner/moderator >> >> >> ----- Reply message ----- >> From: "Tim Ellison, W4TME" <t...@flex-radio.com> >> To: <flexradio@flex-radio.biz> >> Subject: [Flexradio] New Release >> Date: Fri, Feb 24, 2012 1:17 pm >> >> >> Your bird is correct. We plan to make the new release that has the new >> 60m privileges available @ 12:01AM ET on 5-March-2012 >> >> Tim Ellison, W4TME >> Product Management, Sales & Support >> FlexRadio Systems^(TM) >> 4616 W Howard Ln, Suite 1-150 >> Austin, TX 78728 >> Phone: 512-535-4713 Ext. 223 >> Email: t...@flexradio.com <mailto:t...@flexradio.com> >> Web: www.flexradio.com <http://www.flexradio.com> >> >> logo >> >> >> On 2/24/2012 3:22 PM, Guy WR7K wrote: >>> I heard from a little bird that the new 60M band will be available >> on 3/5 and should be an update for that on the same date....guy >>> _______________________________________________ >>> FlexRadio Systems Mailing List >>> FlexRadio@flex-radio.biz >>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>> Knowledge Base: http://kc.flexradio.com/ Homepage: >> http://www.flexradio.com/ >> _______________________________________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flexradio.com/ Homepage: >> http://www.flexradio.com/ > > > ------------------------------ > > Message: 12 > Date: Fri, 24 Feb 2012 19:29:21 -0500 > From: "Chuck ONeal" <cdon...@comcast.net> > To: <flexradio@flex-radio.biz> > Subject: Re: [Flexradio] Behringer DEQ2496 RFI Spikes > Message-ID: <203D33CF32A44FE2B42D077853991197@Isabelle> > Content-Type: text/plain; format=flowed; charset="iso-8859-1"; > reply-type=original > > Mark, > > How far away is your transmit antenna from the rig/audio chain? > > Chuck K1KW > > ----- Original Message ----- > From: "Mark Weidhaas" <mweidh...@cox.net> > To: <flexradio@flex-radio.biz> > Sent: Friday, February 24, 2012 2:43 PM > Subject: [Flexradio] Behringer DEQ2496 RFI Spikes > > >> I have tried cheater plugs with no luck. I have ferrites on everything. I >> have chokes on my antenna line, both directly outside my shack and at the >> 33' vertical antenna base. If I lay my mic / headset on my desk, the >> spikes >> go away. As soon as I touch the headsets, the spikes come back. I use a >> Heil >> foot switch for PTT. I even tried audio transformers on both the headset >> audio and mic inputs. It seems "I am in the ground loop"...... >> >> Original Post >> >> <I have been trying to integrate a Behringer DEQ2496 into my audio chain >> with my Flex 5000A. My shack is on the second floor of my house so RFI is >> a >> constant problem. Using only my Behringer Xenyx802 mixer board and my >> 5000A >> there are no major RFI problems. I have isolated the 802 from the >> ballanced >> line input on the 5000A with a Jensen JT-11P-1 audio transformer. When I >> add >> the DEQ2496 I get an RFI spike at about 2~3 Hz. I can see the spike on >> both >> the 5000A panadapter and on an oscilloscope tapped at my 811H amp output. >> I >> have tried various audio isolation techniques but no joy. The spiking is >> the >> most pronounced with the amp on. Has anyone encountered this issue and >> solved this problem ? if so please advise.> >> >> >> Mark Weidhaas >> W7MGW >> TRA 11810 / NAR 87698 / L3 >> Mobile: (602) 300-5114 >> mweidh...@cox.net >> >> _______________________________________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flexradio.com/ Homepage: >> http://www.flexradio.com/ > > > > > ------------------------------ > > Message: 13 > Date: Fri, 24 Feb 2012 20:36:39 -0500 > From: "Chuck ONeal" <cdon...@comcast.net> > To: <t...@flexradio.com>, "Robert Costa, KB6QXM" <kb6...@yahoo.com> > Cc: t...@flexradio.com, flexradio@flex-radio.biz > Subject: Re: [Flexradio] New Release > Message-ID: <00474E607ED2480187A59157D77782D5@Isabelle> > Content-Type: text/plain; format=flowed; charset="UTF-8"; > reply-type=response > > Why not here as well??? I don't do facebook... > > > ----- Original Message ----- > From: "Tim Ellison, W4TME" <t...@flex-radio.com> > To: "Robert Costa, KB6QXM" <kb6...@yahoo.com> > Cc: <flexradio@flex-radio.biz>; <t...@flexradio.com> > Sent: Friday, February 24, 2012 6:38 PM > Subject: Re: [Flexradio] New Release > > >> There are new goodies in PowerSDR v2.3.x. And bug fixes too. I have let >> a few of them out of the bag on the FlexRadio Enthusiasts Facebook page >> (http://www.facebook.com/groups/flexradio/) >> >> Tim Ellison, W4TME >> Product Management, Sales & Support >> FlexRadio Systems? >> 4616 W Howard Ln, Suite 1-150 >> Austin, TX 78728 >> Phone: 512-535-4713 Ext. 223 >> Email: t...@flexradio.com <mailto:t...@flexradio.com> >> Web: www.flexradio.com <http://www.flexradio.com> >> >> logo >> >> >> On 2/24/2012 5:32 PM, Robert Costa, KB6QXM wrote: >>> Tim, >>> >>> Will there be anything else in the software or is it policy not to >>> discuss that until release? Bug fixes, new features? >>> >>> 73, >>> Robert >>> KB6QXM >>> "Ham Radio Open Conversation" >>> Yahoo group owner/moderator >>> >>> >>> ----- Reply message ----- >>> From: "Tim Ellison, W4TME" <t...@flex-radio.com> >>> To: <flexradio@flex-radio.biz> >>> Subject: [Flexradio] New Release >>> Date: Fri, Feb 24, 2012 1:17 pm >>> >>> >>> Your bird is correct. We plan to make the new release that has the new >>> 60m privileges available @ 12:01AM ET on 5-March-2012 >>> >>> Tim Ellison, W4TME >>> Product Management, Sales & Support >>> FlexRadio Systems^(TM) >>> 4616 W Howard Ln, Suite 1-150 >>> Austin, TX 78728 >>> Phone: 512-535-4713 Ext. 223 >>> Email: t...@flexradio.com <mailto:t...@flexradio.com> >>> Web: www.flexradio.com <http://www.flexradio.com> >>> >>> logo >>> >>> >>> On 2/24/2012 3:22 PM, Guy WR7K wrote: >>>> I heard from a little bird that the new 60M band will be available >>> on 3/5 and should be an update for that on the same date....guy >>>> _______________________________________________ >>>> FlexRadio Systems Mailing List >>>> FlexRadio@flex-radio.biz >>>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>>> Knowledge Base: http://kc.flexradio.com/ Homepage: >>> http://www.flexradio.com/ >>> _______________________________________________ >>> FlexRadio Systems Mailing List >>> FlexRadio@flex-radio.biz >>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>> Knowledge Base: http://kc.flexradio.com/ Homepage: >>> http://www.flexradio.com/ >> _______________________________________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flexradio.com/ Homepage: >> http://www.flexradio.com/ >> > > > > > ------------------------------ > > Message: 14 > Date: Fri, 24 Feb 2012 18:55:35 -0800 > From: "Don" <kd...@sonic.net> > To: "[FlexRadio]" <FlexRadio@flex-radio.biz> > Subject: [Flexradio] New Release > Message-ID: <18BF250FE7074474AE9861825E1DC16E@DonPC> > Content-Type: text/plain; charset="iso-8859-1" > > Wait a minute, I thought the idea of the FlexRadio Reflector was for news and > support. > > Now your saying we have to join Facebook also, no thanks. > > > > Don kd6hq > > > ------------------------------ > > Message: 15 > Date: Sat, 25 Feb 2012 02:57:31 +0000 > From: k3...@qsl.net > To: "Don" <kd...@sonic.net>, flexradio-boun...@flex-radio.biz, > "[FlexRadio]" <FlexRadio@flex-radio.biz> > Subject: Re: [Flexradio] New Release > Message-ID: > > <1442405703-1330138652-cardhu_decombobulator_blackberry.rim.net-771470921-@b4.c6.bise6.blackberry> > > Content-Type: text/plain > > Facebook is for kids > Sent from my Verizon Wireless BlackBerry > > -----Original Message----- > From: "Don" <kd...@sonic.net> > Sender: flexradio-boun...@flex-radio.biz > Date: Fri, 24 Feb 2012 18:55:35 > To: [FlexRadio]<FlexRadio@flex-radio.biz> > Subject: [Flexradio] New Release > > Wait a minute, I thought the idea of the FlexRadio Reflector was for news and > support. > > Now your saying we have to join Facebook also, no thanks. > > > > Don kd6hq > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > > > > > ------------------------------ > > Message: 16 > Date: Fri, 24 Feb 2012 22:15:29 -0500 > From: "Hanford R Wright" <jo...@earthlink.net> > To: <k3...@qsl.net>, "'Don'" <kd...@sonic.net>, > <flexradio-boun...@flex-radio.biz>, "'[FlexRadio]'" > <FlexRadio@flex-radio.biz> > Subject: Re: [Flexradio] New Release > Message-ID: <003801ccf36b$baa24a30$2fe6de90$@net> > Content-Type: text/plain; charset="US-ASCII" > > I wouldn't touch facebook with a ten foot pole. > > HANFORD R. WRIGHT WA4LZC > CRA # 1515 CCA# AC11-12590 > > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of k3...@qsl.net > Sent: Friday, February 24, 2012 21:58 > To: Don; flexradio-boun...@flex-radio.biz; [FlexRadio] > Subject: Re: [Flexradio] New Release > > Facebook is for kids > Sent from my Verizon Wireless BlackBerry > > -----Original Message----- > From: "Don" <kd...@sonic.net> > Sender: flexradio-boun...@flex-radio.biz > Date: Fri, 24 Feb 2012 18:55:35 > To: [FlexRadio]<FlexRadio@flex-radio.biz> > Subject: [Flexradio] New Release > > Wait a minute, I thought the idea of the FlexRadio Reflector was for news > and support. > > Now your saying we have to join Facebook also, no thanks. > > > > Don kd6hq > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > > > > > ------------------------------ > > Message: 17 > Date: Fri, 24 Feb 2012 21:16:46 -0600 > From: "Lee Mushel" <herbe...@centurytel.net> > To: "Chuck ONeal" <cdon...@comcast.net>, <t...@flexradio.com>, "Robert > Costa, KB6QXM" <kb6...@yahoo.com> > Cc: flexradio@flex-radio.biz, t...@flexradio.com > Subject: Re: [Flexradio] New Release > Message-ID: <AEC84E516A524B37A41A03E0A58EE678@NewComputer> > Content-Type: text/plain; format=flowed; charset="UTF-8"; > reply-type=response > > I certainly hope we don't tie Flex-Radio to any of the Social Baloney! > > Lee K9WRU > ----- Original Message ----- > From: "Chuck ONeal" <cdon...@comcast.net> > To: <t...@flexradio.com>; "Robert Costa, KB6QXM" <kb6...@yahoo.com> > Cc: <t...@flexradio.com>; <flexradio@flex-radio.biz> > Sent: Friday, February 24, 2012 7:36 PM > Subject: Re: [Flexradio] New Release > > >> Why not here as well??? I don't do facebook... >> >> >> ----- Original Message ----- >> From: "Tim Ellison, W4TME" <t...@flex-radio.com> >> To: "Robert Costa, KB6QXM" <kb6...@yahoo.com> >> Cc: <flexradio@flex-radio.biz>; <t...@flexradio.com> >> Sent: Friday, February 24, 2012 6:38 PM >> Subject: Re: [Flexradio] New Release >> >> > > > > > > ------------------------------ > > Message: 18 > Date: Fri, 24 Feb 2012 20:33:44 -0700 > From: Dale Taylor <dnktay...@gmail.com> > To: flexradio@flex-radio.biz > Subject: [Flexradio] PowerSDR fails to start, has errors > Message-ID: > <CA+kyNaM=mrhjrhu34aj-ucjstrlmgicbfxhlho_pzg8uhq1...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I've never had any problems with my Flex setup until now. It appears > something has happened to the PowerSDR software. I might have had a system > update and a reboot or some such thing but was not aware of it. I get the > following 2 errors. I did some searching for filename doesn't exist errors > in the knowledge base and nothing turned up which is suprising. Any clues > or links would be appreciated. > > Dale Taylor, N7OXF > > Here's a link to the first error shot: > http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error1.JPG > > Here's a link to the second screen shot: > http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error2.JPG > > > ------------------------------ > > Message: 19 > Date: Fri, 24 Feb 2012 22:54:15 -0500 > From: "Hanford R Wright" <jo...@earthlink.net> > To: "'Dale Taylor'" <dnktay...@gmail.com>, <flexradio@flex-radio.biz> > Subject: Re: [Flexradio] PowerSDR fails to start, has errors > Message-ID: <003a01ccf371$24d53bb0$6e7fb310$@net> > Content-Type: text/plain; charset="US-ASCII" > > Dale > You might try a system restore, go back a day before the update and you > should have everything back. Also I suggest that you change your computers > automatic updates to notify me but don't automatically download or install > them. In other words do your updates manually when you have Power SDR off. > Hope that helps. > > 73's > HANFORD R. WRIGHT WA4LZC > CRA # 1515 CCA# AC11-12590 > > HANFORD R. WRIGHT WA4LZC > CRA # 1515 CCA# AC11-12590 > > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dale Taylor > Sent: Friday, February 24, 2012 22:34 > To: flexradio@flex-radio.biz > Subject: [Flexradio] PowerSDR fails to start, has errors > > I've never had any problems with my Flex setup until now. It appears > something has happened to the PowerSDR software. I might have had a system > update and a reboot or some such thing but was not aware of it. I get the > following 2 errors. I did some searching for filename doesn't exist errors > in the knowledge base and nothing turned up which is suprising. Any clues > or links would be appreciated. > > Dale Taylor, N7OXF > > Here's a link to the first error shot: > http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error1.JPG > > Here's a link to the second screen shot: > http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error2.JPG > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > > > > > ------------------------------ > > Message: 20 > Date: Fri, 24 Feb 2012 21:52:21 -0700 > From: Dale Taylor <dnktay...@gmail.com> > To: flexradio@flex-radio.biz > Subject: Re: [Flexradio] PowerSDR fails to start, has errors > Message-ID: > <ca+kynamfh1nioes6bwhcqtpogjptgcu_jncce8eketldoas...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Wow, so I just tried a few things and here's my results (no it's not fixed) > > I completely uninstalled the FlexRadio drivers and the PowerSDR software. > I also went and manually deleted C:\Users\MyName\App Data\Roaming\Flex > Radio Systems. The offending files seemed to be in there. > > After deleting everything and rebooting I installed the software again. > > This time the software worked and I loaded my previous settings without > issue. > > I shut down the software, rebooted and went to run it all again and now I > see the very same error again. Wild, this isn't caused by some boot > without closing problem. I did a normal shutdown of the software and then > it won't run a 2nd time. > > Any clues are appreciated... bummer > > On Fri, Feb 24, 2012 at 8:33 PM, Dale Taylor <dnktay...@gmail.com> wrote: > >> I've never had any problems with my Flex setup until now. It appears >> something has happened to the PowerSDR software. I might have had a system >> update and a reboot or some such thing but was not aware of it. I get the >> following 2 errors. I did some searching for filename doesn't exist errors >> in the knowledge base and nothing turned up which is suprising. Any clues >> or links would be appreciated. >> >> Dale Taylor, N7OXF >> >> Here's a link to the first error shot: >> http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error1.JPG >> >> Here's a link to the second screen shot: >> http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error2.JPG >> > > > ------------------------------ > > Message: 21 > Date: Sat, 25 Feb 2012 08:53:21 +0100 > From: N7BCP <n7bcp.la...@gmail.com> > To: Lee Mushel <herbe...@centurytel.net> > Cc: "flexradio@flex-radio.biz" <flexradio@flex-radio.biz>, > "<t...@flexradio.com>" <t...@flexradio.com> > Subject: Re: [Flexradio] New Release > Message-ID: <e857cb88-626e-417f-81e5-15520ae50...@gmail.com> > Content-Type: text/plain; charset=us-ascii > > It's a communication channel with nearly a billllllllllion (think Dr. Evil) > active users that can now discover Flex Radio. Im glad Flex set up a social > spot where bandwidth is used to share photos and video of our stations and > general chit-chat is the point. Participation is, of course, optional. > > 73s > -Larry > N7BCP > > On 25.02.2012, at 04:16, "Lee Mushel" <herbe...@centurytel.net> wrote: > >> I certainly hope we don't tie Flex-Radio to any of the Social Baloney! >> >> Lee K9WRU >> ----- Original Message ----- From: "Chuck ONeal" <cdon...@comcast.net> >> To: <t...@flexradio.com>; "Robert Costa, KB6QXM" <kb6...@yahoo.com> >> Cc: <t...@flexradio.com>; <flexradio@flex-radio.biz> >> Sent: Friday, February 24, 2012 7:36 PM >> Subject: Re: [Flexradio] New Release >> >> >>> Why not here as well??? I don't do facebook... >>> ----- Original Message ----- From: "Tim Ellison, W4TME" >>> <t...@flex-radio.com> >>> To: "Robert Costa, KB6QXM" <kb6...@yahoo.com> >>> Cc: <flexradio@flex-radio.biz>; <t...@flexradio.com> >>> Sent: Friday, February 24, 2012 6:38 PM >>> Subject: Re: [Flexradio] New Release >> >> >> _______________________________________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > > > > ------------------------------ > > Message: 22 > Date: Sat, 25 Feb 2012 08:58:06 -0500 > From: Robert McGwier <rwmcgw...@gmail.com> > To: Jerry <wa2...@verizon.net> > Cc: "flexradio@flex-radio.biz" <flexradio@flex-radio.biz> > Subject: Re: [Flexradio] 472-479 KHz receiving and transmitting ERP > and antenna models > Message-ID: > <ca+k5gzc3yxprbnidf5g2x6n2+flkp08so3murupw77mcodr...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > This won't help with the 475 band but let us know how well you receive WWVB > and other major known stations. > > Good luck! > Bob > > > On Friday, February 24, 2012, Jerry <wa2...@verizon.net> wrote: >> I just ordered a LF converter and we will see how it works. Jerry > http://wb9kzy.com/lfconv.htm >> > > > -- > Bob McGwier > Facebook: N4HYBob > ARS: N4HY > > > ------------------------------ > > Message: 23 > Date: Sat, 25 Feb 2012 15:24:58 -0000 > From: "John C. Fraser" <j...@jcfraser.fsnet.co.uk> > To: <flexradio@flex-radio.biz> > Subject: [Flexradio] Rough audio > Message-ID: <6AC69C4BF2014032A629B3C50E67E8DC@cameronPC> > Content-Type: text/plain; charset="iso-8859-1" > > Hello. > Using a Flex 3000, Toshiba laptop running Vista > For some reason the received audio on ssb is very rough, this has just > happened lately, did a couple of restarts on the laptop but the problem is > still there, I thought it might have been due to a Windows upgrade, so I > carried out a restore to a couple of weeks ago but still the same problem. > Did a Power SDR installation to the latest version, 2.2.3.19042 but still the > same. > The rough audio is also present on CW and another thing I have noticed is > that there is a big spike in the middle of the display on all bands and stays > in the middle when you tune up or down the band but have no idea if this is > related to the audio problem. > Any help or advice would be very much appreciated. > > John. GM4WJA > > ------------------------------ > > Message: 24 > Date: Sat, 25 Feb 2012 10:29:03 -0500 > From: Bernie Huth <bh...@garlic.com> > To: Hanford R Wright <jo...@earthlink.net>, <k3...@qsl.net>, 'Don' > <kd...@sonic.net>, <flexradio-boun...@flex-radio.biz>, "'[FlexRadio]'" > <FlexRadio@flex-radio.biz> > Subject: Re: [Flexradio] New Release > Message-ID: <cb6e686f.a6b4f%bh...@garlic.com> > Content-Type: text/plain; charset="US-ASCII" > > Make that a fifteen-foot pole! > > Bernie Huth > W4BGH > -------------- > > on 2/24/12 10:15 PM, Hanford R Wright at jo...@earthlink.net wrote: > >> I wouldn't touch facebook with a ten foot pole. >> >> HANFORD R. WRIGHT WA4LZC >> CRA # 1515 CCA# AC11-12590 >> > > > > > > > ------------------------------ > > Message: 25 > Date: Sat, 25 Feb 2012 15:36:55 +0000 > From: Jim Jannuzzo <jsqu...@msn.com> > To: <j...@jcfraser.fsnet.co.uk>, <flexradio@flex-radio.biz> > Subject: Re: [Flexradio] Rough audio > Message-ID: <snt107-w61c094de717796bd26c3fbae...@phx.gbl> > Content-Type: text/plain; charset="iso-8859-1" > > > John,I've been chasing the same "rough audio" problem here. I've tried all > the usual suspects- legacy driver/ TI driver/ MS driver, bigger buffers/ > smaller buffers, new 1394 card, polishing dpc latency to below 150 us. Some > seem to take the raspiness out, but it seems to come back. Reading the > stream of posts here, there are several with reports of raspiness. It has > become fatiguing to listen to my once pristine receive audio. >> From: j...@jcfraser.fsnet.co.uk >> To: flexradio@flex-radio.biz >> Date: Sat, 25 Feb 2012 15:24:58 +0000 >> Subject: [Flexradio] Rough audio >> >> Hello. >> Using a Flex 3000, Toshiba laptop running Vista >> For some reason the received audio on ssb is very rough, this has just >> happened lately, did a couple of restarts on the laptop but the problem is >> still there, I thought it might have been due to a Windows upgrade, so I >> carried out a restore to a couple of weeks ago but still the same problem. >> Did a Power SDR installation to the latest version, 2.2.3.19042 but still >> the same. >> The rough audio is also present on CW and another thing I have noticed is >> that there is a big spike in the middle of the display on all bands and >> stays in the middle when you tune up or down the band but have no idea if >> this is related to the audio problem. >> Any help or advice would be very much appreciated. >> >> John. GM4WJA >> _______________________________________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > > > ------------------------------ > > Message: 26 > Date: Sat, 25 Feb 2012 08:18:03 -0800 (PST) > From: ROGER SCHMITT <rogschm...@yahoo.com> > To: "flexradio@flex-radio.biz" <flexradio@flex-radio.biz> > Subject: [Flexradio] Vista/7 conversion > Message-ID: > <1330186683.66337.yahoomail...@web39403.mail.mud.yahoo.com> > Content-Type: text/plain; charset=iso-8859-1 > > Updated my Laptop to Win7 and now I can not get the Driver for Flex1500 to > install > > Reinstalled the Program but still can not get the driver to install.? Any > suggestions > > KY4RS > > > ------------------------------ > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: > http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ > > End of FlexRadio Digest, Vol 82, Issue 25 > ***************************************** _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
