On Fri, Mar 2, 2012 at 5:39 PM, Robert Logan <[email protected]> wrote:
> Now a Q for you. Got anything useful to say? > Actually, I answered your question, which was, "how can I connect a straight key and the paddles so I can hand-send CW without having to touch the mouse and change the internal keyer mode." So I assume what I said would have been useful to you. So just to make sure, here is the answer again in a more succinct form. If you do not want to change mode for the keyer in PowerSDR you need to use an external keyer. You can then put the straight key in parallel with the output of the keyer. Connect all that to the dit input (tip on the 1/4" plug). Now you can send using either straight key or paddles. To solve the problem of the extra box for the keyer, I recommend the Pico-Keyer-Plus. It is a small circuit board that can be mounted to the back of your paddles. Mine conveniently mounts on the right rear of my bencher paddles using double-stick foam tape so there is no extra box to lug around. So there is your answer. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 [email protected] +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
