Hi Klaus

Thank you for the prompt response.  At least I know everything is working to 
specification.

I look forward to the additional functionality in the future.

Kind regards
Tony
VK5TT

From: Klaus Lohmann [mailto:flexradio...@t-online.de]
Sent: Friday, 6 April 2012 5:54 PM
To: Tony Taddeo (Smartsoft)
Cc: 'flexradio@flex-radio.biz'
Subject: Re: [Flexradio] Power SDR 2.3.5 - Flex 5000 - Heros Interface

 "Tony Taddeo (Smartsoft)" <mailto:t...@smartsoft.com.au> schrieb:
> Hi All
> I have just obtained a Heros Tiny Plus-Cat SCR Preselector. All seems to work 
> well when used external to PowerSDR. I have the following issues;
> -when connected via 12C interface and Flexwire I/O port the preselector does 
> not track the frequency in PowerSDR software. Not sure if it should track ?
> -when changing parameters on the Heros dialog in PowerSDR the preselector 
> seems to click (indicating relays being activated/changing) but band 
> selection, fine tuning and bypass doesn't seem to be working correctly. 
> Selecting Band A does give some attenuation though I don't think it is 
> correctly tuning 1.8-3MHZ. All other band settings seem to bypass all 
> filtering.
> The Tiny Plus-Cat Preselector is the latest version using the latest 
> firmware. I feel there is an issue with the control signals between the Flex 
> Radio 5000 to the 12C interface.
> Does anyone have this working ? Any assistance would be greatly appreciated.
> Kind regards
> Tony
> VK5TT
>
> _______________________________________________
> FlexRadio Systems Mailing List
> mailto:FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
>

Hi Tony,

PowerSDR supports at present only TinyPreselector. Tiny Plus and Tiny Plus-CAT 
have to be implemented in the code.
Please note that a tracking mode is not yet on the agenda for the preselector.

Using the preselector in local mode will give you full access to all 
capabilities until PowerSDR has been adapted to
Tiny Plus-CAT.

Kind regards,

Klaus, DK7XL

--
Klaus Lohmann
FlexRadio Systems Representative for EU
Godeke-Michels-Weg 12
D-21762 Otterndorf
GERMANY
"Tune in Excitement!" (tm)

Tel.: (+49) 4751 900501
Fax.:(+49) 4751 998569
Cell Phone: 0171 2751584
kl...@flex-radio.com<mailto:kl...@flex-radio.com>
flexradio...@t-online.de<mailto:flexradio...@t-online.de>
FlexRadio Systems: www.flex-radio.com<http://www.flex-radio.com>
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to