On Wed, Jun 6, 2012 at 3:50 PM, Dr. William J. Schmidt, II < b...@wjschmidt.com> wrote:
> While operating here on PJ4, I've been getting reports of bad audio. and > that is something I didn't work through before I left. I've no idea what > the controls at the bottom of the right center do. other than, I suppose > the > mic gain and the vox. I'm using my Heil Proset II that I've used on every > one of my other dozen plus radios with great success (unless it got busted > in transport?). I'm really open to suggestions.. > You need to go through the audio chain setup sequence. It is described in the KB library. In a nutshell: 1. Turn off all options, e.g. DX, CPDR, VOX, DEXP in the mic window on the front console. 2. Set mic gain to mid scale (35). 3. Open the Mixer menu. 4. Select your mic input. 5. Set TX power to 0 (so you don't actually transmit or you can use a dummy load). 6. Select mic input level display on the TX meter. 7. Key the rig, talk normally, and adjust the slider in the MIXER for not more than 0dB on meter. 8. Set TX meter to read EQ level. 9. Open the Equalizer menu. 10. Set the TX EQ the way you want it. 11. Key the rig, talk normally, and adjust the TX Preamp gain control for not more than 0dB on meter. 12. Open the Setup>DSP>AGC/ALC window. 13. Enable the leveler (check the box). 14. Set Leveler Max Gain to 0dB. 15. Set TX meter to read ALC. 16. Key the rig, talk normally, and adjust the mic gain (front of console) for not more than 0dB on the TX meter. 17. Turn on DX and DEXP if you want. 18. Key the rig, talk normally, and verify ALC stays below 0dB. 19. Turn TX power back up and transmit. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 br...@lloyd.com +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
