Is there someone who can mentor me with VAC? I have been reading docs, trying examples from the Flex WIKI, doing trial-and-error etc., but still can’t get audio I/O using VAC (V.4.12). Frustrated! I am pretty sure VAC is working, since I can see activity in the VAC Control Panel. I have set up two virtual audio cables, and have corresponding cables defined in PSDR, also in whatever software apps I happen to be trying. The buffers all match and setup parameters are copied right out of the docs and WIKI articles. I have tried the MME and other drivers, doesn’t seem to make any difference. When tuned to signals, the software doesn’t decode anything, nor can I modulate a signal. When trying to pipe audio to/from VOIP apps, I can’t generate any audio nor hear anything coming back. What I want to do: a) Get any basic packet or RTTY program running with PSDR/Flex, then use this as a “template” for experimenting with other digital mode software. b) Want to use PSDR/Flex as my single source for audio I/O for other VOIP apps. My balanced mic audio goes into my Flex 5K, and the PSDR audio output goes from the F5K to an external stereo amp/speakers. This works fine as a voice transmitter/receiver, but something is not set up right using the Flex/VAC as a virtual sound card. c) I would like to tap off Flex/PSDR and run audio I/O to 3rd party VOIP applications such as Skype, TeamViewer, EchoLink, etc. I have tried all the audio I/O selections I can find but still can’t talk/hear with the digital mode software, nor hear using VOIP.
I think my problem is failure to define proper I/O device on the 3rd party software. Seems simple but I can’t make it work. Help? Suggestions? Thanks and 73, Dan (K0DAN) _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
