Carol I suspect that the checkbox in setup-Audio-VAC1 is set to automatically turn onVAC for digital modes, which means it will not automatically turn on for SSB. There are several ways to correct this: 1. Check the "Enable VAC" checkbox in the same window and VAC will always be on 2. Manually click on the VAC button on the main display when you want to enable it.
73 Neal n Sep 10, 2012, at 1:06 PM, "Carol F. Milazzo, KP4MD/W6" <kp...@cfmilazzo.com> wrote: > I read this post and need to know if VAC is no longer available in SSB > modes in PowerSDR 2.4.4. > > Those of us who run SSTV and on the 60 meter channels where both data and > voice are allowed need to have access to VAC while in the SSB mode. > > Carol, KP4MD > > Rich - W3ZJ rich at w3zj.com > Wed Sep 5 09:10:35 CDT 2012 > ________________________________ > Changing modes form any mode to an SSB mode turns off VAC1 even though > "Enable for Digital modes. Disable for all others" is NOT checked. I > need VAC1 enabled for all modes as I use CW Skimmer on CW and > WinWarlber's Digital Voice Keyer on SSB both of which require VAC1. > 73, Rich - W3ZJ > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
