Yes having this problem as well. It appears the formats have changed
and now have to fix up every entry in the memory. The error is
The VFO RX frequency of 443.55MHz does not match the frequency of
448.55MHz and split is not enabled for the memory record modified or
selected. This is an invalid configuration
The VFO A RX frequency will not be updated to the defined memory record
value unless Split is enabled in the memory record or the RX and TX
frequencies are changed to be the same frequency.
The VFO A RX frequency will be set in PowerSDR to the memory record
transmit frequency of 448.55MHz
My be Tim could check this out?
John, ve3dvv
Message: 3
Date: Sun, 23 Sep 2012 13:03:49 -0500
From: Steve Fowler<killmo...@gmail.com>
To: Dave Beumer W?DHB<d...@w0dhb.net>
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] CTCSS Problem?
Message-ID:
<cabwclnb34atrja_mo5ygy99vkfnx_e1n7vkqphbpn5p0iz4...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
I just checked and found that all of my VHF / UHF memories would not
function after the upgrade. They were there and I could select them, but
each time I got a message about the VFO freqs being incorrect.
I only had a dozen local repeaters entered so I just used the memory
screen
to manually delete them all, which gave me a database error on each
element
in each row during the delete.
Now I can enter new memories and everything works fine again,
including the
CTCSS.
Steve
KC0FU
On Sun, Sep 23, 2012 at 12:41 PM, Dave Beumer W?DHB<d...@w0dhb.net>
wrote:
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/