That's good to know.  I knew the dies were removable on the West Mountain
but I never could find the die set.


On Thu, Mar 7, 2013 at 1:01 PM, <kq...@verizon.net> wrote:

> When I bought the crimper from West Mountain radio, they had replaceable
> dies, and I bought the entire set.
>
> The other die sets are still listed under "Accessories" for the crimp tool.
>
> 73, Jim  KQ6EA
>
>
> On 03/07/13, William H. Fite<omni...@gmail.com> wrote:
>
> If you are buying a crimper, look at Powerwerx. You can change out the
> dies, which you cannot do with the crimper from West Mountain. At least if
> other dies are available for the WM crimper, I have never found them.
>
>
>
> On Tue, Mar 5, 2013 at 10:33 PM, Ray, K9DUR <k9...@rnacs.com> wrote:
>
> > Bill,
> >
> > 10 AWG is not snug if you get PowerPole connectors with the 45 Amp
> contacts
> > instead of the normal 30 Amp contacts.
> >
> > Anderson makes 3 sizes of contacts to fit the same housing: 15 Amp, 30
> > Amp,
> > & 45 Amp. The 15 Amp contacts are great for the smaller wire used by many
> > accessories. The 30 Amp contacts are good for your typical VHF/UHF mobile
> > rig, while the 45 Amp contacts are the cat's meow for your HF rig.
> >
> > West Mountain Radio sells all 3 sizes.
> >
> > You are dead on about buying the good crimpers. They are about $50 (last
> > time I looked), but worth EVERY penny.
> >
> > 73, Ray, K9DUR
> > http://k9dur.info
> >
> >
> >
> > _______________________________________________
> > FlexRadio Systems Mailing List
> > FlexRadio@flex-radio.biz
> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> > Knowledge Base: http://kc.flexradio.com/ Homepage:
> > http://www.flexradio.com/
> >
>
>
>
> --
> I can explain it for you, but I can't comprehend it for you.
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/ Homepage:
> http://www.flexradio.com/
>



-- 
I can explain it for you, but I can't comprehend it for you.
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to