May I suggest that you try resetting the database. Often this cures most problems like you are experiencing.
Mack W4AX ------------------ 73, Mack *W4AX* http://w4ax.com On Thu, Apr 11, 2013 at 5:36 PM, Peter Gorman (G1FXE) < g1fxe-hamra...@ntlworld.com> wrote: > Is it possible that the centre contact of the BNC socket has spread so > that the pin of the plug isn't making contact ? > > > On 11 Apr 2013, at 21:37, Otto <rotootor2...@yahoo.com> wrote: > > > > > Hi Peter > > I see the same thing with power showing on the power SDR meter, nothing > on external meters. Tried two different BNC adapters and pieces of coax > going to meters. Can't even get a output voltage on an Oscope hooked to > sensors. I get a very low level carrier on another rig hooked to another > antenna when I press the tune button on the Flex powerSDR. So something is > coming out at a very low level that the Oscope can't measure. I can > measure 5 watts output from my other rig on the Oscope at about .02 V. Not > a wiggle out of the Flex. > > > > > > From: Peter Gorman (G1FXE) <g1fxe-hamra...@ntlworld.com> > > To: Otto <rotootor2...@yahoo.com> > > Cc: "flexradio@flex-radio.biz" <flexradio@flex-radio.biz> > > Sent: Thursday, April 11, 2013 3:03 PM > > Subject: Re: [Flexradio] Flex 1500 No RF output > > > > I've experienced similar before. In my case it was a poor connection on > the BNC connector, powersdr showed full output but nothing got to my > external swr/power meter. Is this what your seeing ? > > > > Peter.....(G1FXE) > > > > On 11 Apr 2013, at 19:29, Otto <rotootor2...@yahoo.com> wrote: > > > > > No RF output on 1500. Worked great the day before. Checked all > settings to make sure nothing changed. Tried tune out and still no output. > Did a default reset, noRF output, went through and set things up again. > Still no RF output even on tune out set at full. Tried all bands and modes. > Everything else works great, receive only is not checked. I think the RF > amp is dead from all research. Unless a reinstall of software would make a > difference, haven't tried that yet. Anybody else run into this issue > before? Hopefully a easy fix or will send in for repair. Would like to have > it gone over anyway. > > > KC9NXB > > > _______________________________________________ > > > FlexRadio Systems Mailing List > > > FlexRadio@flex-radio.biz > > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > > > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
