Hi Tim,

Thanks for the reply.
Will the unit operate if I remove the cover to see if the fans are
working or not?
Or is there a safety switch that disables TX with the case removed?

Is there a test mode I can put the radio into to make the fans spin or
do I just need to get it hot again?

Mike.
M0AWS
http://www.m0aws.co.uk

On 05/05/13 18:00, flexradio-requ...@flex-radio.biz wrote:
> Message: 9
> Date: Sat, 04 May 2013 19:32:22 -0400
> From: Tim Ellison <t.m.ellison...@gmail.com>
> To: flexradio@flex-radio.biz
> Subject: Re: [Flexradio] F3K Temperature when running QRP?
> Message-ID: <51859a86.5040...@gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> That seems a little high.  I wonder if one of the fans is not rotating.
>
> Tim Ellison
> On 5/4/2013 7:10 PM, Mike wrote:
>> > Hi All,
>> >
>> > Quick  question about Flex3000 temperature when running JT65 on the HF
>> > bands.
>> >
>> > I've been playing with JT65 on 40m and 20m using just 5w of power and
>> > the ALC at -0.1dB, the signal is very clean and I am getting great
>> > results, my only concern is the temperature, it's getting up to 63c
>> > which seems very high for such a low output level?
>> > I have the fans set to come on at 35c in an attempt to try and keep the
>> > temperature down.
>> >
>> > Does anyone else see these kinds of temperatures running QRP?
>> > Is this normal?
>> > Do I need to be concerned?
>> >
>> > Mike.
>> > M0AWS
>> > http://www.m0aws.co.uk


_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to