Hi all I have a Flex3000 and up to now I've used N1MM with it just fine using the guide at http://flexradiowiki.abrohamnealsoftware.com/mw/index.php?title=N1MM To recap, a pair for Com7-17 and 8-18. CW on Com7.
In N1MM I use Ctrl-K and pre-programmed F-keys for most of my QSOs, so don't use any interface to key the rig and send my CW, and that's how I've done it for about 3 years, and I'm happy with this. I now have Win-Test and I have CAT control working on Win-Test but I am not sure what I'm missing to get CW keying working from the Alt-K menu. Here's my config: Com7 -> Network > 9800 8N1 pin4 = CW, RTS = Always Off, Active with: Both radios Com8 -> Radio 1 > 96090 8N1 pin4 DTR = Always off, pin 7 RTS = Always off, active with: Both Radios Radio 1 = FT-2000 Radio 2 = FT-2000 The above setup is to mirror as closesly as I can the settings from the Wiki and N1MM settings. When I key CW (ALT-K - the Wintest equilavlent of N1MM's Ctrl-K) nothing happens. No PTT, no sidetone. As I say, I do not have a Winkeyer or Microham module or similar. Can anyone please point me in the right direction. TIA Mike G7TWC _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/