My flex 3000 does the same thing when I use my mouse wheel to scroll the VFO on the panadapter. I have a mouse wheel the free-wheels and tunes very fast.
Sent from my iPhone 5 > On Sep 29, 2013, at 1:28 PM, "Bill Bordy, NJ1H " <n...@comcast.net> wrote: > > I have been active on the satellites lately with my Flex-5000 using external > transverters. PowerSDR version 2.6.4. > > I have noticed an error in the PA Info display, Ctrl-Shift-I, when I am in > mode B and transmit is enabled. The Temp: will read very unusual > temperatures, i.e. 572, intermittently for a moment. Values change, but seem > to be repetitive. I have seen large negative F values also. The Voltage: also > reads 0 briefly sometimes.The radio appears to function normally when this > occurs. > > This occurs even if the TX Drive is set to 0. > > I am running SatPC32 V.12.8b to control the uplink and downlink frequencies > using x10 Speed. The problem seems to only occur when CAT is enabled on > SatPC32. > > This seems like a conflict between variables used by PowerSDR's CAT control > and the PA Info routines. > > Is anyone else using a Flex-5000 seeing this? > > 73, > Bill > NJ1H > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/