I know this is a basic question; but I am stumped. Any help would be appreciated. Yesterday I put up my 160m L . I had used this antenna before with good results. When I hit the Tune button on Psdr, the psdr 7.2 crashed. I had to shut down the radio (5K) wait and reloaded. I reoriented the L in case of interaction with my loop with no success. The final test was taking the L completely away (opposite direction) from the loop. Same results , click on the Tune button (10 watts) and the program crashes. So I have rf in the shack. Where to start, I havent the foggiest idea. It only does it with the 160 L. The loop, verticals are ok. I fought rf before but on a legacy radio, where does one start with sdr? On the radio, computer. Possible culprits? Audio, power lnes? Any suggestions on where to start or culprits would be appreciated. Thanks and 73 Marty W8AKS
Sent from my iPad _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
