Ok, now I'm really confused. "Story"
After installing Windows 10. I started checking to make sure everything was
still working. I use a start up program to setup all the programs and modes
necessary to run PowerSDR. I've been doing it the same way for the last 4
years (using Win 7). When I started it under Win 10, it started telling me
that the com ports were not available. So I started checking. First I
opened up vspMgr and it reported that all the com ports were setup just the
way the always have been. So I closed that program and opened up "Device
Manager". It reported under "Ports" that com ports 1-5 and LPT3 were
active.
But none of the other com ports were listed. However under "Other devices",
"Bulk-In, Interface" and all Com ports 1-15 were listed with the yellow
sign, which when checked they were not installed.
So after reading "Allen Shuff" reply I decided to try that. I deleted
vspMgr and reset the system. Then I checked "Device manager" again, now all
my comports are back the way they were originally! And vspMgr is not loaded
as an active program?
My start up program that I use is not operating normally...... so I don't
really know what is going on, but it's back working again.....
Under "Other devices", "Bulk-In, Interface" still has an error note on
it.....Don
-----Original Message-----
From: Neal Campbell
Sent: Monday, August 03, 2015 11:16 AM
To: amsct...@comcast.net
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Windows 10
If what I outlined is the problem, I just went thru this with Steve a
couple of weeks ago, he definitely is recommending that people avoid the
usage of Startup folders for programs requiring VSPMgr comm ports.
73
Neal Campbell
Abroham Neal LLC
On Mon, Aug 3, 2015 at 2:08 PM, <amsct...@comcast.net> wrote:
Perhaps these questions and comments should be directed to Steve Nance,
the author of DDutil and VSPmanager:
https://groups.yahoo.com/neo/groups/DDUtil/info
73,
Mike - N8MSA
----- Original Message -----
From: "Allen Shuff" <allensh...@gmail.com>
To: "Don" <kd...@sonic.net>
Cc: "[Flexradio]" <flexradio@flex-radio.biz>
Sent: Monday, August 3, 2015 2:00:35 PM
Subject: Re: [Flexradio] Windows 10
Hi Don,
I did not notice until you mentioned it, since my ports were all okay. I
did try to open VSP Manager after
seeing your message and i observed the sane thing.
When I tried to go to the location where VSP Manager was installed, I
noticed it was under a temp folder
After uninstalling the VSP manager using add remove programs, i made a
volder VSP Manager under C:\ and moved the setup.exe folder there.
I then executed the setup.exe folder and all is well now.
On Mon, Aug 3, 2015 at 12:28 PM, Don <kd...@sonic.net> wrote:
> I knew it was too good to be true. Anyone else having problems with
> vspMgr not being recognized in Windows 10?
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> To opt out of the Reflector:
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>
--
Allen R. Shuff
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
