Paul, Your DAX not being consistent maybe the way windows enumerates the sound devices when Windows boots. You need a speaker in the Playback properties of Sound Properties and a line in or mic in the Record , this is just to keep default sounds off the DAX drivers. If you don't have something plugged into your sound card, just put a blank plug there, Windows doesn't care , as long as something is there.
On some of the latest versions of Wsjt , open a second slice, have an A and B slice available. Seems WSJT is always looking for VFO A and B. If you use TS2000 or Ts480, either one works for me. It hangs and fails the CAT Test mode otherwise. 73, Dudley WA5QPZ Sent from my iPhone > On Sep 1, 2015, at 9:03 AM, Paul Mandel <p...@paulmandel.net> wrote: > > I have two issues that seem to dog me. I am running the current release of > the software although I had the same issue on .14. My DAX issue, when I > quit SmartSDR sometimes (most of the time but not always) programs such as > WSJT will not see a steam. When I open up DAX it shows no slice even > though I have the #1 slice chosen. If I choose the #2 slice about 50% of > the time I can get it to see the data. The only sure fire method is to > reboot the computer. > > > > The persistence issue has to do with the transmit enable button. I have > tried reinitializing the 6300 and I still have the issue. I have saved a > totally new profile and I still have the issue. > > > > Any help is appreciated. I wanted to try the community before putting in a > trouble ticket. > > > > Paul de W4PGM > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > To opt out of the Reflector: > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
