My experience with N1MM+ is that you must use the SAME serial port for both N1MM+ and fldigi. Otherwise lockup occurs. I have only used with PowerSDR, so I have no specifics for SMARTSDR.
On 6/22/2016 20:27, Gordon P. Howell, Jr. wrote: > I tried to make a post this evening and every time I sign in, my sign in > doesn’t take with no error message, bad password or anything else. Just > tells me I am signed in but the system won’t let me post my query. > > I’ll try here. > > Does ANYONE have a procedure for configuring N1MM+ and SMARTSDR to work with > FLDIGI. I have tried numerous times tonight, after having to do a complete > Win 7 reinstall when DDUtil began behaving badly. The reinstall was tortuous > but fix the problem, as Steve suggested. > > Each time I tell the N1MM digital interface to use FLDIGI, and the FLDIGI > window appears, N1MM goes into lockup mode. I am using COM6 in SMARTCAT as > the radio interface for N1MM, and it connected just fine before I began > configuring the digital part. Thinking that I needed a separate CAT > interface for FLDIGI, I added COM7, and specified that in FLDIGI. Standalone > it runs just fine. But it completely locks up N1MM. > > I’ve dumped it and reinstalled more than 3 times tonight. > > Has anyone tried another method than what I am using? > > FLEX 6700, SMARTSDR 1.7.30, WIN 7 Home, completely up to date since I had to > reinstall all the updates and it took more than 24 hours for everything to > download and settle. > > Thanks > > Geep > WA4RTS > > And if one of the admins can tell me why the community site tells me I am > logged in but lies, I would appreciate it. > > > > _______________________________________________ > FlexRadio Systems Mailing List > [email protected] > To opt out of the Reflector: > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > _______________________________________________ FlexRadio Systems Mailing List [email protected] To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
