Hello,
I am not a flightgear developer (yet) but have been playing with it a little bit lately. With the current CVS tree (from the evening of 1/18/04) I get the following errors on the console: chinook 9:44pm ~ % fgfs Failed to find runway 29 at airport KBJC Error: base = 0,0 Error: base = 0,0 WARNING: PUI: Trying to remove invalid puGroup from puGroup stack! WARNING: PUI: Trying to remove invalid puGroup from puGroup stack! WARNING: PUI: Trying to remove invalid puGroup from puGroup stack! First one is my fault. The base = 0,0 errors I found in simgear/scene/sky/cloud.cxx but I am not sure I understand what they mean offhand. I'm guessing I'm getting one from each of the identical error messages in that area of the code. I can reproduce the last message by pressing escape to quit, and then hitting Cancel. my .fgfsrc: --airport=KBJC --disable-clouds --visibility-miles=1000 --runway=29 --fg-root=/usr/local/lib/FlightGear --fg-scenery=/usr/local/lib/FlightGear/data/Scenery:/disk2/boggs/FlightGear/Scenery-0.9.3 I am also seeing the "white flash" problem (not black flash) that some others have reported (I have an NVidia card). it occurs quite frequently when taking off from KBJC at least. Also, I posted a message a while back to the fgfs-users list but didn't get my problem resolved. terragear does not seem to update my scenery properly. It's supposed to just show up as it gets downloaded, right? I see terragear download it but it never shows up. I did get it to work once when flying around SFO, but never while flying around KBJC. Does terragear update reliably for others? If so, it's probably my config. Please let me know if there is any more detailed information I can provide. Thanks in advance, -Adam _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
